SHENMAO Addresses HoP Issues, Improves ICT Testability


Reading time ( words)

SHENMAO Technology Inc. will introduces its new generation PF606-P140 lead-free solder paste and PF606-P245 lead-free zero-halogen solder paste at the upcoming SMTA International Exhibition, to be held September 19–20, 2017 at the Donald Stephens Convention Center in Rosemont, Illinois. SHENMAO will be in Booth 534.

Featuring superior continuous high-speed printability and a wide reflow process window for excellent solderability, the PF606-P140 and PF606-P245 prevent head-on-pillow (HoP) issues and can easily fit into highly complicated PCB designs through excellent convergence performance. The PF606-P140 features void performance at 3.7%, while the PF606-P245, 5.5%.

The PF606-P140 and PF606-P245 improve ICT testability with flux completely removed from top of solder to prevent contamination of test pins during test operation. Minimal flux residue gathers near outside of solder joint on the PCB substrate, a substantial improvement over legacy solder pastes.

About SHENMAO

For more than 44 years, SHENMAO has been dedicated to produce solder products including water soluble and no-clean solder paste, laser solder paste, solder preforms, cored solder wire, wave solder bar alloys, wave soldering fluxes, extremely pure solder powder up to Type 8, BGA and micro-BGA solder sphere, wafer level packaging solder paste and fluxes, LED die attach paste, high performance liquid fluxes, solder preform, solar ribbon, and plating anode used in PCB fabrication, assembly and semiconductor packaging processes.

SHENMAO solder materials are available at affordable cost from 10 worldwide locations.

For more information, visit www.shenmao.com.

Share


Suggested Items

Video from productronica 2017: Mycronic Discusses Precision Jetting Systems

11/17/2017 | I-Connect007
From the show floor during productronica 2017, Clemens Jargon, VP of Global Dispensing at Mycronic, discusses with I-Connect007 Technical Editor Pete Starkey the company’s portfolio of precision jetting equipment, with particular reference to the speed and versatility of the MYSmart series.

Solder Preforms 101: Ask the Expert

11/13/2017 | Patty Goldman, I-Connect007
At the recent SMTA International 2017 event, Jerry Sidone, product manager for the engineered materials at Alpha Assembly Solutions, speaks with I-Connect007 Managing Editor Patty Goldman about the voiding challenge, especially with bottom termination components, and how solder technologies from Alpha are helping PCB assemblers address this issue.

HDI Considerations: Interview with ACDi's Garret Maxson

11/10/2017 | Stephen Las Marias, I-Connect007
Garret Maxson, manager of engineering services at American Computer Development Inc. (ACDi), discusses the PCB assembly challenges when dealing with high-density interconnect (HDI) boards, parameters to consider, and strategies to help facilitate a smooth assembly process when using HDI boards.



Copyright © 2017 I-Connect007. All rights reserved.