Electrolube Unveils New 2K Coating Sprayable Kit


Reading time ( words)

Hot on the heels of the launch of revolutionary two-part Conformal Coating range (2K series), Electrolube are unveiling a brand new kit to mix, dispense and spray 2K300 Conformal Coating. The new kit offers some key advantages for customer trials and spray-testing requirements as it facilitates full testing and evaluation of the 2K300 series without taking existing dispensing equipment out of production.        

2K300 is a two-part system, offering high flexibility and low stress across an operating temperature range of -40°C to +130°C. The coating is hydrophobic and highly resistant to condensation, salt mist and chemicals and is fully IPC-CC-830 compliant. 

Throughout the development of the entire 2K range, Electrolube has worked closely with selective coating machine manufacturers to ensure that formulations are optimised for application using commercially available dispensers. The new 2K300 Kit from Electrolube takes this one step further enabling easy testing and small production volumes to be coated without the necessity for dispensing equipment. 

Head of Electrolube's Conformal Coatings Division, Phil Kinner, comments: “Electrolube can offer a Conformal Coating for virtually every type of application and this easily assembled kit will allow small production trials of our 2K300 series without a specialist dispenser. The kit comprises a resin kit, dilution fluid and a ready assembled aerosol for dispensing. It is designed as a one-time use kit.”   

Electrolube Managing Director, Ron Jakeman, comments: “Electrolube is fast becoming the go-to resource for specialist technical solutions that solve customers’ manufacturing problems and help them bring high-quality products to market faster. This new kit will not only allow customers to trial our 2K300 solution, but is also ideally placed to cope with small production volumes.” 

About Electrolube

Electrolube, a division of H.K. Wentworth Limited, is a leading manufacturer of specialist chemicals for electronics, automotive and industrial manufacturing.  Core product groups include conformal coatings, contact lubricants, thermal management materials, cleaning solutions, encapsulation resins and maintenance and service aids.

The extensive range of electro-chemicals at Electrolube enables the company to offer a ‘complete solution’ to leading manufacturers of electronic, industrial and domestic devices, at all levels of the production process. Through collaboration and research, the company is continually developing new and environmentally friendly products for customers around the world and their commitment to developing ‘greener’ products has been endorsed by the ISO 14001 standard for the highly efficient Environmental Management System in place at the company.

Electrolube is represented in over 55 countries with an established network of subsidiaries and distributors. By offering genuine security of scale and a reliable supply chain, the company is able to deliver a truly tailored service.

Share


Suggested Items

PCB Pad Repair Techniques

01/08/2018 | Bob Wettermann, BEST Inc.
There are a variety of reasons behind pads getting "lifted" completely or partially from the laminate of a PCB. Per the just revised IPC-A-610 Revision G, a defect for all three classes occurs when the land is lifted up one or more pad thicknesses. Lifted pads can occur when a device has been improperly removed or there is a manufacturing defect in the board construction. In any case, as with any repair, the ultimate decision on the ability to repair the pad lies with the customer.

Cleaning Trends: The Challenges of Miniaturization and Proximity

11/01/2017 | Patty Goldman, I-Connect007
At the recent SMTA International conference, I-Connect007 Managing Editor Patty Goldman caught up with Ram Wissel, VP of Global Technology at KYZEN, to talk about the latest cleaning challenges, and bringing Industry 4.0 into the world of cleaning in PCB assembly.

Soldering Tip: Key to Good Solder Joints

10/31/2017 | Stephen Las Marias, I-Connect007
In an interview with SMT Magazine, Enrique Moreno, technical support engineer at JBC Soldering, discusses the key parameters to consider during hand soldering to achieve the perfect solder joint. He also talks about the the increasing move towards automation and robotics soldering.



Copyright © 2018 I-Connect007. All rights reserved.