AIM Appoints Jesus Ruiz to the Position of Technical Applications Engineer


Reading time ( words)

AIM Solder is pleased to announce the appointment of Jesus Ruiz to the position of technical applications engineer. Jesus will provide technical support to AIM customers in Mexico’s Northeast Region.

Jesus Ruiz is an industrial engineer with more than twenty years of experience in the SMT industry. Having excelled in a wide range of roles, including product development and manufacturing, Jesus will support AIM customers in Nuevo Leon, Tamaulipas, and Coahuila.

“We’re pleased to welcome Jesus to our growing technical support team,” said AIM’s Technical Support Director, Carlos Tafoya. “We’re confident that he will provide exceptional support to AIM customers in the Northeastern region and we look forward to his valuable contributions.”

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, click here.

Share


Suggested Items

Solder Printing Process Inputs Impacting Distribution of Paste Volume

12/14/2017 | Marco Lajoie and Alain Breton, C-MAC Microelectronics
The volume of solder deposition, like any process, has variations that may be characterized by a statistical distribution curve, whether normal or non-normal. As complexity, density, cost and reliability requirements increase, there may be value in narrowing the distribution curve. It is common sense that less variation serves the interest of quality of the more complex and dense circuit boards.

Improving Solder Paste Printing

12/12/2017 | Stephen Las Marias, I-Connect007
Of the three elements involved in the solder paste printing process—stencil, solder paste, and printer—the stencil is considered one of the major factors affecting the transfer efficiency, accuracy, and consistency, of solder pastes into the pads, especially with the continuing trend towards miniaturization.

Equipment Matters in Solder Paste Printing

12/06/2017 | Stephen Las Marias, I-Connect007
The solder paste printing process has always been considered a major contributor to yield loss. According to many studies, solder paste printing accounts for up to 70% of all PCB assembly defects. For the December issue of SMT Magazine, we interviewed experts in the solder paste printing process to learn more about the key issues leading to this huge percentage of defects, and the technology developments that are addressing these challenges and improving yields in the process.



Copyright © 2017 I-Connect007. All rights reserved.