Indium to Feature Stable, Low-Voiding Solder Paste at productronica 2017

Reading time ( words)

Indium Corporation will feature its void-reducing Indium8.9HF solder paste series to help customers "Avoid the Void" at productronica, November 14-17, in Munich, Germany.

The Indium8.9HF Series delivers no-clean, halogen-free solder paste solutions designed to produce low-voiding–plus improved stability–during the printing process. Under optimal process conditions, this series:

  • Demonstrates consistent printing performance for up to 12 months when refrigerated
  • Maintains excellent printing and reflow performance after remaining at room temperature for one month
  • Delivers excellent response-to-pause even after being left on the stencil for 60 hours

The Indium8.9HF solder paste series boasts a unique oxidation barrier technology that makes these pastes perfectly suited for a variety of applications, especially automotive assembly.

For more information about Indium Corporation’s low-voiding solder pastes, click here or see Indium Corporation in hall A4 at booth 214.


Suggested Items

Cleaning with Data

03/19/2018 | Barry Matties, I-Connect007
Tom Forsythe, vice president of KYZEN, spoke to Barry Matties about KYZEN’s new process control monitoring and data service. They discussed the drivers behind these developments, the company's focus on managing data, and how KYZEN plans to support an industry embracing more cleaning and Industry 4.0.

Manufacturability: Pad Relief and Mask Relationship to Solder Joint Volume

03/09/2018 | Ken Horky, Peterson Manufacturing
Electronic assembly thermal management has always been an issue but has become more significant as we pack more power and function into a smaller form factor. In recent years, the growing use of LEDs for illumination on a large scale has presented additional thermal demands.

RTW IPC APEX EXPO: Indium Discusses Fighting Solder Voids

03/06/2018 | Real Time with...IPC
Voiding has increasingly become one of the most critical challenges in the soldering process. In this interview, Christopher Nash, product manager for the PCB assembly solder paste business of Indium, speaks about how the company is helping customers address the voiding challenge.

Copyright © 2018 I-Connect007. All rights reserved.