AIM to Highlight REL61 at the SMTA Long Island Expo & Tech Forum


Reading time ( words)

AIM Solder is pleased to announce their participation at the SMTA Long Island Expo & Tech Forum, scheduled to take place on September 28th, 2017 at the Melville Marriott in Melville, New York. AIM will highlight their revolutionary REL61™ lead-free solder alloy, along with their full line of solder assembly materials.

REL61 addresses the most challenging issues with today’s common lead-free alloys, specifically soldering performance, cost and durability. A low silver/low cost alloy, REL61 not only is more durable than SAC305, but has a wider process window than any low/no silver alloy on the market today. REL61 improves wave and selective soldering performance, addressing sluggish barrel fill issues common to other low/no silver alloys and eliminating costly alloy maintenance and analysis requirements.  Extensive testing indicates that REL61 can reduce tin whisker formation as well as outperform SAC alloys in thermal shock, vibration and drop shock resistance.  Combined with AIM M8 Solder Paste, REL61 has reduced voiding on BTC packages by over 45%, increasing both thermal performance and solder joint integrity.

AIM will also highlight its full line of advanced solder materials, including its solder paste, liquid flux and solder alloys, including its newly developed REL22™ solder alloy for extremely harsh environments. To discover all of AIM’s products and services, visit the company at the SMTA Long Island Expo & Tech Forum for more information.

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, click here.

Share


Suggested Items

Solder Printing Process Inputs Impacting Distribution of Paste Volume

12/14/2017 | Marco Lajoie and Alain Breton, C-MAC Microelectronics
The volume of solder deposition, like any process, has variations that may be characterized by a statistical distribution curve, whether normal or non-normal. As complexity, density, cost and reliability requirements increase, there may be value in narrowing the distribution curve. It is common sense that less variation serves the interest of quality of the more complex and dense circuit boards.

Improving Solder Paste Printing

12/12/2017 | Stephen Las Marias, I-Connect007
Of the three elements involved in the solder paste printing process—stencil, solder paste, and printer—the stencil is considered one of the major factors affecting the transfer efficiency, accuracy, and consistency, of solder pastes into the pads, especially with the continuing trend towards miniaturization.

Equipment Matters in Solder Paste Printing

12/06/2017 | Stephen Las Marias, I-Connect007
The solder paste printing process has always been considered a major contributor to yield loss. According to many studies, solder paste printing accounts for up to 70% of all PCB assembly defects. For the December issue of SMT Magazine, we interviewed experts in the solder paste printing process to learn more about the key issues leading to this huge percentage of defects, and the technology developments that are addressing these challenges and improving yields in the process.



Copyright © 2017 I-Connect007. All rights reserved.