Indium's Dr. Ning-Cheng Lee to Present at SiP Conferences China 2017


Reading time ( words)

Indium Corporation's Dr. Ning-Cheng Lee, vice president of technology, will share his expertise on Interconnect Materials for SiP Packaging at the inaugural SiP Conferences China 2017 on October 19–20, in Shenzhen, China.

System-in-Package (SiP) technology is advancing quickly with components becoming smaller at each stage of development. To keep up with the ever-increasing demand for miniaturization, solder powder used to make SiP solder paste must become finer. In his presentation, Dr. Lee will explore if there is a limit to the solder powder size required for SiP applications, and how solder paste can support further SiP miniaturization.

Dr. Lee is a world-renowned soldering expert, an SMTA Member of Distinction, and IEEE Fellow. He has extensive experience in the development of fluxes, alloys, and solder pastes for SMT, and extensive experience in the development of high-temperature polymers, encapsulants for microelectronics, underfills, and adhesives. In addition to SMT and semiconductor soldering materials, his research also extends to nanobonding technology and thermal conductive materials.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

Share


Suggested Items

Tips to Improve Soldering Tip Life and Reduce Cost

10/10/2018 | Thermaltronics
Whether in production, or repair and rework, the cost of soldering iron tips can be easily overlooked, but with today’s requirement for higher temperatures in lead-free solder applications, the consumption of tips has dramatically increased. This fact, combined with changes in tip design to meet the higher thermal load requirements, has also resulted in escalating tip costs, making tip care a high priority.

What SMT Component Shortages Mean for Design and Manufacturing Engineers

09/13/2018 | Russell Poppe, JJS Manufacturing
Much has been written about the increasing shortages of electronic components such as MLCCs, chip resistors and other semiconductor devices. And the manufacturing industry is now seeing price increases and greatly extended lead times. It seems the situation is likely to get rapidly worse rather than better. What can we do? Read on.

RTW NEPCON South China: Mycronic Discusses Industry 4.0

09/12/2018 | Real Time With... NEPCON South China
At the recent NEPCON South China 2018 event in Shenzhen, Clemens Jargon, VP for Global Dispensing and Asia at Mycronic, discusses I-Connect007's Edy Yu the challenges that customers face on their journey towards Industry 4.0, and how Mycronic is addressing these issues. From jet printing to solder paste inspection, to pick-and-place, Jargon talks about their total solutions that aim to help customers take their production to the next level.



Copyright © 2018 I-Connect007. All rights reserved.