JBC to Showcase Innovations in Hand Soldering at SMTA Guadalajara


Reading time ( words)

JBC Soldering is exhibiting at SMTA Guadalajara, which takes place at the Hotel Riu Plaza Guadalajara in Mexico on October 18–19.

SMTA Mexico is dedicated to the advancement of the electronics industry through member education and interaction. By attending, visitors will have access to high level technical conference and find out the latest technologies for the industry.

Customers visiting JBC’s booth will have the opportunity to discover the most advanced technologies in Industry 4.0. The JBC team will introduce the benefits of JBC Net, the first smart system to optimize traceability in hand soldering.

The company will also showcase the following:

  • The Fume Extractor FAE, capable of removing fumes and gases safely and efficiently. It features a unique fully-customizable system that optimizes fume extraction operating only when needed.
  • The Automatic Solder Feeder SF, that allows you to feed solder wire automatically from any position. Thanks to a small blade with V-cut, it avoids solder and flux splashing during the soldering process.
  • The Solder Pot CT-SA, the ideal solution for tinning wires and components faster and safer. This robust and stable unit gives security while working and avoids tipping over accidentally.

Share


Suggested Items

Improving Solder Paste Printing

12/12/2017 | Stephen Las Marias, I-Connect007
Of the three elements involved in the solder paste printing process—stencil, solder paste, and printer—the stencil is considered one of the major factors affecting the transfer efficiency, accuracy, and consistency, of solder pastes into the pads, especially with the continuing trend towards miniaturization.

Equipment Matters in Solder Paste Printing

12/06/2017 | Stephen Las Marias, I-Connect007
The solder paste printing process has always been considered a major contributor to yield loss. According to many studies, solder paste printing accounts for up to 70% of all PCB assembly defects. For the December issue of SMT Magazine, we interviewed experts in the solder paste printing process to learn more about the key issues leading to this huge percentage of defects, and the technology developments that are addressing these challenges and improving yields in the process.

What Matters Most is Communication

12/04/2017 | Stephen Las Marias, I-Connect007
While there may be new techniques and strategies, technologies, equipment, tools, and materials to employ and utilize, there is always one thing that will ensure the manufacturing/ assembly success of your product: communication. Communication between the designer and the assembler will help improve the manufacturability and assembly of the final product—even before the board design gets fabricated.



Copyright © 2017 I-Connect007. All rights reserved.