Ascentech to Show New Optical Inspection System and Ultrasonic Cleaner at SMTA Long Island Expo


Reading time ( words)

Ascentech LLC will exhibit at and participate in the SMTA Long Island Expo & Tech Forum on October 18, 2017 at the Melville Marriott Long Island in New York. At the forum, Ascentech will highlight the Inspectis C12 and the GEN3 Gensonic Ultrasonic stencil cleaner, and will discuss all of the products in the Ascentech product line.

The Inspectis C12 is a plug & play, reliable and cost-effective high definition optical digital inspection system with 12:1 optical zoom, auto focus, integrated illumination, on-board controls and SD-card image capture. The C12 produces crisp images of inspection objects up to 90x magnification directly on an LCD monitor or PC.

The Gensonic is a manually-operated, ultrasonic transducer unit for cleaning stencils used in printing solder pastes and adhesives. It can be used either directly on the printer or at a separate cleaning station.

Ascentech, LLC is the North American Distributor for GEN3 Systems Ltd., offering the MUST Solderability test system (wetting balance), the Auto-SIR2 – Surface Insulation Resistance test system, the CM-Series Ionic Contamination Test system (R.O.S.E.), the Gensonic Ultrasonic stencil cleaner, and DC-Series conformal coating dip-coaters. Ascentech also distributes High Definition and Ultra High Definition inspection cameras from Inspectis Optical Systems AB and High Definition inspection cameras by Optilia Instruments AB. Ascentech personnel will be on hand to field questions regarding all of the abovementioned products and their benefits.

About Ascentech, LLC

Ascentech, LLC is a technology and solutions provider and distributor to the electronics manufacturing and assembly industry with nearly 20 years’ experience. Ascentech is the North American Distributor for Inspectis Optical Systems AB, Optilia Instruments AB, as well as GEN3 Systems, and also supplies the industry with other testing and process optimization solutions for electronics manufacturing. To learn more, click here.

Share


Suggested Items

Improving Solder Paste Printing

12/12/2017 | Stephen Las Marias, I-Connect007
Of the three elements involved in the solder paste printing process—stencil, solder paste, and printer—the stencil is considered one of the major factors affecting the transfer efficiency, accuracy, and consistency, of solder pastes into the pads, especially with the continuing trend towards miniaturization.

Equipment Matters in Solder Paste Printing

12/06/2017 | Stephen Las Marias, I-Connect007
The solder paste printing process has always been considered a major contributor to yield loss. According to many studies, solder paste printing accounts for up to 70% of all PCB assembly defects. For the December issue of SMT Magazine, we interviewed experts in the solder paste printing process to learn more about the key issues leading to this huge percentage of defects, and the technology developments that are addressing these challenges and improving yields in the process.

What Matters Most is Communication

12/04/2017 | Stephen Las Marias, I-Connect007
While there may be new techniques and strategies, technologies, equipment, tools, and materials to employ and utilize, there is always one thing that will ensure the manufacturing/ assembly success of your product: communication. Communication between the designer and the assembler will help improve the manufacturability and assembly of the final product—even before the board design gets fabricated.



Copyright © 2017 I-Connect007. All rights reserved.