Indium Features Solder Paste for Fine Feature Printing at IWLPC 2017


Reading time ( words)

Indium Corporation will feature its Indium3.2HF Solder Paste at the 14th International Wafer-Level Packaging Conference (IWLPC 2017—Silicon to Systems), October 24–26, in San Jose, California.

Indium3.2HF is an air or nitrogen reflow, water-soluble solder paste specifically formulated for fine feature printing applications (Type 6SG).

Indium3.2HF is formulated to offer consistent, repeatable printing performance combined with a long stencil life. In addition, Indium3.2HF delivers:

  • Good response-to-pause
  • A wide reflow profile window
  • Outstanding slump resistance
  • Excellent wetting capability
  • Superior fine-pitch soldering ability

From water-soluble solder pastes to ultra-low residue, no-clean fluxes, Indium Corporation has an industry-proven portfolio of products that meet the current and evolving challenges encountered in fine-pitch SiP applications.

For more information on Indium Corporation's materials for SiP or Indium3.2HF Solder Paste, click here or visit Indium Corporation's booth 39.

Share


Suggested Items

DFx on High-Density Assemblies

12/01/2017 | Jonas Sjoberg, Chris Nash, David Sbiroli, and Wisdom Qu, Indium Corporation
Use of new technologies poses a number of challenges for solder paste selection, PCB design, assembly process, and reliability. The type of end product will have different challenges, concerns, and requirements in all aspects. The assembly line for many of these end products will look very similar, but specification limits would be different.

Creating the Perfect Solder Joint

11/03/2017 | Stephen Las Marias, I-Connect007
From a visual standpoint, a good solder joint should be smooth, bright, shiny, clean, and have a nice concave solder fillet. But how do you ensure that inside those joints, good intermetallic bonds are formed? Solder joints play several different roles, and they represent several different opportunities to be a problem, a partial improvement, or a complete improvement. Since all solder joints aren’t created equal, the first step is to understand what is expected or required of that joint.

Cleaning Trends: The Challenges of Miniaturization and Proximity

11/01/2017 | Patty Goldman, I-Connect007
At the recent SMTA International conference, I-Connect007 Managing Editor Patty Goldman caught up with Ram Wissel, VP of Global Technology at KYZEN, to talk about the latest cleaning challenges, and bringing Industry 4.0 into the world of cleaning in PCB assembly.



Copyright © 2017 I-Connect007. All rights reserved.