KIC and SmartRep Intro Real-Time Dashboard, Traceability and Data Analytics at productronica


Reading time ( words)

KIC will exhibit with SmartRep in Hall A2 Stand 361 at productronica 2017, scheduled to take place November 14–17, 2017 at the Messe München in Munich, Germany. The KIC team will debut the new ecosystem led by the Vantage network software system and discuss the SPS smart profiler.

The new KIC Vantage software is designed to help engineers gain insight into their reflow and wave solder processes to enable better and faster decision making. It provides a real-time dash-board for thermal processes, accessible anywhere, from any authorized PC or mobile device. The process data is automatically stored in a central location where the engineer can quickly retrieve and share all relevant data. 

KIC.jpg

The Vantage delivers value to users, not through massive amounts of raw data, but through convenient access to only relevant and/or actionable data.  For example, with a few mouse clicks, the user can access traceability data for every assembled PCB within a certain time frame, oven, shift, client name, or all of the above. 

The new KIC SPS smart profiler collects the profile data and compares it to the process specifications. Within seconds, the new smart profiler also suggests an improved reflow oven setup. It utilizes smart factory technologies to acquire and analyze thermal process for new insight and actionable data leading to increased production line utilization, reduced rework and electricity use.

Move toward the future of line connectivity, flexible production, process transparency, machine learning and real-time insight. For more information about KIC, stop by Hall A2, Stand 361 during productronica.

About KIC

Based in San Diego, KIC is the industry leader in automated thermal process tools and systems for reflow, wave, curing and semiconductor thermal processes. The company pioneered the development of oven profilers and process optimization tools, and then worked to create the next generation of thermal systems to help manufacturers improve the thermal process quality while reducing cost.

KIC products include the KIC SPS, K2, X5, KICstart2, ProBot, 24/7 Wave and the KIC RPI. With the introduction of cutting edge tools, the company continues to stay on the leading edge of process optimization and automatic thermal process systems, and has won numerous industry awards.

For more information, click here.

Share


Suggested Items

Why You Want Your EMS Partner to Be Annoying and Boring

01/04/2018 | Neil Sharp, JJS Manufacturing
Outsourcing part or all of your manufacturing to an electronics manufacturing service (EMS) provider can be daunting. Handing over some of the control of your business can be a scary prospect.

Equipment Matters in Solder Paste Printing

12/06/2017 | Stephen Las Marias, I-Connect007
The solder paste printing process has always been considered a major contributor to yield loss. According to many studies, solder paste printing accounts for up to 70% of all PCB assembly defects. For the December issue of SMT Magazine, we interviewed experts in the solder paste printing process to learn more about the key issues leading to this huge percentage of defects, and the technology developments that are addressing these challenges and improving yields in the process.

Video from productronica 2017: Koh Young Focuses on Total Inspection Solution

11/20/2017 | I-Connect007
At the show floor of productronica 2017, I-Connect007 Technical Editor Pete Starkey speaks with Managing Director Harald Eppinger of Koh Young Europe GmbH about the principles of Koh Young’s total 3D inspection solution for SMT process optimization and yield improvement.



Copyright © 2018 I-Connect007. All rights reserved.