CyberOptics Integrates Advanced MRS Tech into 3D SPI System


Reading time ( words)

CyberOptics Corporation will demonstrate the new SE3000 3D SPI system with a proprietary Multiple-Reflection Suppression (MRS) sensor in Hall A2 Stand 439 at productronica 2017, scheduled to take place November 14–17, 2017 at the Messe München in Germany.

The SE3000 3D SPI system is the very first SPI system to incorporate the industry-leading MRS sensor technology, with a finer resolution for the best accuracy, repeatability and reproducibility – even on the smallest paste deposits. The unique sensor architecture simultaneously captures and transmits multiple images in parallel, while highly sophisticated 3D fusing algorithms merge the images together, delivering microscopic image quality at production speed. Combined with the award-winning, easy-to-use software, solder paste inspection has reached a new level of precision for the most stringent requirements.

"Smaller and mobile is a key trend driving the demand for an even higher level of accuracy and resolution," said Dr. Subodh Kulkarni, President and CEO, CyberOptics, "We've optimized our proprietary MRS sensor technology that is widely used for Automated Optical Inspection applications world-wide, and integrated it into our new SE3000 SPI system to address these critical customer requirements better than any alternate solution."

For maximum flexibility, the new SE3000-DD 3D AOI dual lane, dual sensor system caters to varying widths. This unique design provides the ability to inspect high volumes, the convenience of inspecting different board sizes simultaneously on different lanes, or even switching from dual lane to single lane mode to inspect very large boards.

At productronica Germany, CyberOptics will also unveil the new SQ3000 3D CMM system and the new SQ3000-DD 3D AOI system, both powered by MRS technology.

About CyberOptics

CyberOptics Corporation is a leading global developer and manufacturer of high precision sensing technology solutions. CyberOptics sensors are being used in general purpose metrology and 3D scanning, surface mount technology (SMT) and semiconductor markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of its key vertical markets. Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe.

For more information, click here.

Share


Suggested Items

Greatest Challenges in Soldering

12/12/2018 | Stephen Las Marias, I-Connect007
In a recent SMT007 survey, we asked the following question: "What are your greatest challenges when it comes to soldering?" Here are just a few of the replies, slightly edited for clarity.

Dr. Traian Cucu Discusses Low-Temperature and Lead-Free Soldering

12/12/2018 | Happy Holden, I-Connect007
Dr. Traian Cucu, group leader of the Global Applications and Technologies Expert Group (GATE)—R&D—within Alpha Assembly Solutions, speaks with I-Connect007 Technical Editor Happy Holden about low-temperature and lead-free soldering applications, and the many critical advantages that can achieved by moving to a low-temperature process. They talk about the industry's transition to lead-free, the first, second and third generation of adoption of low-temperature alloys.

Greg Vance on SMTA Ohio Chapter Updates

12/05/2018 | I-Connect007 Editorial Team
This summer, Patty Goldman interviewed Greg Vance, senior project engineer at Rockwell Automation and president of the Ohio chapter, at the SMTA Ohio Valley Expo and Tech Forum in Independence, Ohio. Vance discusses the show, young professionals in the industry, and other events, such as solder paste roundtables.



Copyright © 2018 I-Connect007. All rights reserved.