MIRTEC Receives Two Global Technology Awards During productronica


Reading time ( words)

MIRTEC was awarded two 2017 Global Technology Awards in the categories of Best Product–Asia and Inspection–AOI for its MV-3 OMNI Desktop 3D AOI Machine. The awards were presented to the company on November 14, 2017, in a ceremony that took place during productronica in Munich, Germany.

"It is truly an honor to accept these two prestigious Global Technology Awards on behalf of MIRTEC's extremely talented engineering team for their outstanding performance in the design and development of the MV-3 OMNI Desktop 3D AOI machine," stated Brian D'Amico, president of MIRTEC's North American Sales and Service Division. "We are confident that this Technologically Advanced Desktop 3D AOI System will not only provide unprecedented flexibility and performance to the electronics inspection industry, but will undoubtedly set a new standard by which all other Desktop AOI equipment will be measured."

The all NEW MV-3 OMNI Desktop 3D AOI Machine is configured with MIRTEC's OMNI-VISION 3D Inspection Technology which combines MIRTEC’s exclusive 15 Mega Pixel CoaXPress Industrial Camera System with their revolutionary 8 Projection Digital Multi-Frequency Moiré 3D Technology in a newly designed Desktop platform. Fully configured, the new MIRTEC MV-3 OMNI machines feature four 10 Mega Pixel Side-View Cameras in addition to the 15 Mega Pixel CoaXPress Top-Down Camera making this system the most Technologically Advanced Desktop AOI machine in the world.

About MIRTEC

MIRTEC is a leading global supplier of automated inspection systems to the electronics manufacturing industry.  For further information, please click here.

Share


Suggested Items

3D Printing and Medical Electronics: A Disruptive Beneficial Technology

12/11/2018 | Dan Feinberg, Technology Editor, I-Connect007
We are seeing significant advances and increased uses for 3D manufacturing in medicine—many more than 3D-printed and conductive circuits on device structural components. There is enough movement in this area that 3D additive fabrication in medicine—including but not limited to 3D-printed circuits—has become its own topic, and one that we will be watching and continuing to cover.

What's the Scoop? APEX CFX Showcase

05/03/2018 | Philip Stoten, Scoop
The IPC Connected Factory Exchange (CFX) demo at the recent IPC APEX EXPO 2018 trade show in San Diego, California, is a great example of industry collaboration. The CFX Showcase at APEX had 245,000 CFX website page views; 701,200 CFX messages transmitted; and 664.5 million bytes of data exchanged; and the whole thing was pulled together in a matter of weeks. Here's what the participants in the program have got to say.

RTW IPC APEX EXPO: COMET Technologies Highlights Product Range and New Facility

03/12/2018 | Real Time with...IPC
Craig Arcuri of COMET Technologies details the numerous ways his company's technology is employed to manufacture and inspect a wide range of products, from chips to jet engine turbine blades. He also speaks about Lab One, the company's new technology and application center in Silicon Valley.



Copyright © 2018 I-Connect007. All rights reserved.