Kurtz Ersa Enables Big Board Rework


Reading time ( words)

Kurtz Ersa has launched an automated rework platform for large and heavy PCBs. Providing a heatable area of 625 x 625 mm and the capability to handle board thicknesses of up to 10 mm, the HR 600 XL hybrid rework system offers for the first time a professional repair of high-channel components on big boards, as they occur in telecommunications, networks and infrastructure.

The lower IR Matrix Heater consists of 25 heating elements that can be controlled individually and has a total power of 15 kW. In this way, it is possible to obtain an ideal heat distribution on every application during the preheating process.

The highly efficient 800 W hybrid heating head manages the desoldering and soldering of the smallest components to large ball grid arrays measuring up to 60 x 60 mm, in the familiar Ersa quality and reliability. Just like its smaller brother HR 600/2, the HR 600 XL incorporates an automatic and precise component alignment (±0.025 mm). The process control and documentation with the HRSoft 2 user guidance guarantees reproducible repair results.

The HR 600 XL can be used in fully automatic or half-automatic mode to ensure maximum flexibility. It is compatible with the usage of the Ersa Dip&Print station for the preparation of the components with flux or solder paste before soldering.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

How to Benefit From Robotic Soldering Processes

10/28/2020 | Pete Starkey, I-Connect007
Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.

90% Solder Dross Recovery: Eliminate Waste, Save Money

10/20/2020 | Nolan Johnson, I-Connect007
The impact of 90% solder dross recovery can have a substantial impact on reducing waste and increasing cost savings. Nolan Johnson recently spoke with Jay Hardin, MS2® product manager at P. Kay Metal, about the process and benefits of efficient solder dross recovery, as well as product roadmaps, the soldering machine market, and raw materials supply chain for solder alloy manufacturing. As Jay says, “For many companies, the savings are in the thousands or millions” of dollars.



Copyright © 2020 I-Connect007. All rights reserved.