BTU to Discuss New Process Monitor at SMTA Silicon Valley Expo


Reading time ( words)

BTU International Inc. will exhibit at the SMTA Silicon Valley Expo & Tech Forum, scheduled to take place November 29, 2017 at Bestronics Inc. in San Jose, California. BTU will discuss its new Profile Guardian redundant process monitor to support Industry 4.0 and award-winning PYRAMAX platform.

Profile Guardian pairs a thermocouple probe at product height with software to monitor temperature deviation from baseline – independent from control TCs. The redundant process monitor is aware of oven state (recipe change, energy savings modes, etc.), and monitor data can be included in host communications (MES) from the oven. Additionally, it provides board level traceability when paired with bar code readers, which is a requirement for many large OEM/EMS customers.

BTU's PYRAMAX reflow oven is widely recognized as the performance leader in the reflow oven category. The exclusive closed-loop convection ensures process repeatability site-to-site, line-to-line and oven-to-oven regardless of altitude or other factors. WINCON is an advanced Windows-based software system for controlling the operation of BTU thermal processing equipment. It combines both the simplicity of a graphical user interface with powerful diagnostic and analytical tools.

About BTU International

BTU International, a wholly-owned subsidiary of Amtech Group (Nasdaq: ASYS), is a global supplier and technology leader of advanced thermal processing equipment in the electronics manufacturing market.  BTU’s high-performance reflow ovens are used in the production of SMT printed circuit board assemblies and in semiconductor packaging processes. BTU also specializes in precision controlled, high-temperature belt furnaces for a wide range of custom applications, such as brazing, direct bond copper (DBC), diffusion, sintering and advanced solar cell processing. BTU has operations in North Billerica, Massachusetts, and Shanghai, China, with direct sales and service in the U.S.A., Asia and Europe. 

For more information about BTU International, click here.

Share


Suggested Items

Manufacturability: Pad Relief and Mask Relationship to Solder Joint Volume

03/09/2018 | Ken Horky, Peterson Manufacturing
Electronic assembly thermal management has always been an issue but has become more significant as we pack more power and function into a smaller form factor. In recent years, the growing use of LEDs for illumination on a large scale has presented additional thermal demands.

PCB Pad Repair Techniques

01/08/2018 | Bob Wettermann, BEST Inc.
There are a variety of reasons behind pads getting "lifted" completely or partially from the laminate of a PCB. Per the just revised IPC-A-610 Revision G, a defect for all three classes occurs when the land is lifted up one or more pad thicknesses. Lifted pads can occur when a device has been improperly removed or there is a manufacturing defect in the board construction. In any case, as with any repair, the ultimate decision on the ability to repair the pad lies with the customer.

Focus on the New

01/05/2018 | Stephen Las Marias, I-Connect007
It seems like it wasn't too long ago when I was writing about the optimism of the electronics manufacturing and assembly industry going into 2017. Now, here we are again at the beginning of the new year, looking at new trends, disruptive technologies, and emerging markets for 2018. I am also proud to announce our new branding as well as our fresh, new look.



Copyright © 2018 I-Connect007. All rights reserved.