STI Accomplished AS9100D Certification


Reading time ( words)

STI Electronics, Inc., a full-service organization providing training services, training materials, analytical/failure analysis, prototyping, and small-to-medium volume contract PCB assembly, is pleased to announce that it has earned its AS9100D certification.

AS9100 is an aerospace standard based on the ISO 9001 quality system requirements. The standard takes the requirements of ISO 9001 and supplements them with additional quality system requirements, which are established by the aerospace industry in order to satisfy DOD, NASA and FAA quality requirements. The intent of the standard is to establish a single quality management system for use within the aerospace industry.

“It’s hard to express the pride I feel when STI achieves major accomplishments such as this,” said David Raby, President/CEO. “It is another indication of our commitment to building the highest quality products for our customers. I’m also especially proud of the STI personnel that successfully led us through the process of receiving this certification.”

About STI Electronics, Inc.

Since 1982, STI Electronics, Inc. (STI) has been the premier full-service organization for training, consulting, laboratory analysis, prototyping, and small-to-medium volume contract PCB assembly in the electronics industry. STI also produces a complete line of solder training kits and training support products. For more information, click here.

Share


Suggested Items

PCB Pad Repair Techniques

01/08/2018 | Bob Wettermann, BEST Inc.
There are a variety of reasons behind pads getting "lifted" completely or partially from the laminate of a PCB. Per the just revised IPC-A-610 Revision G, a defect for all three classes occurs when the land is lifted up one or more pad thicknesses. Lifted pads can occur when a device has been improperly removed or there is a manufacturing defect in the board construction. In any case, as with any repair, the ultimate decision on the ability to repair the pad lies with the customer.

Top 10 Most-Read SMT007 Columns of 2017

01/02/2018 | I-Connect007
Another year is over in the SMT industry. 2017 saw a myriad of hot topics, including Industry 4.0, the millennials’ entry into the manufacturing space, and alternative solder materials, to name a few. Without further ado, here are the Top 10 columns from SMT007 over the past year.

The Effect of Area Shape and Area Ratio on Solder Paste Printing Performance

12/28/2017 | Stefan Härter, et al.
The ongoing miniaturization trend in the SMT production induces new challenges and highly integrated systems. In passive components, the miniaturization leads to the introduction of the EIA size 01005 or smaller. Despite numerous publications in this field already addressing the printing of such devices, a defined wholly optimized process remains unsolved and inspires further novel research ideas on this topic.



Copyright © 2018 I-Connect007. All rights reserved.