Top 10 Most-Read SMT Articles of 2017


Reading time ( words)

Every year, we like to take a look back at the most popular SMT news and articles. These are the top 10 most-read SMT articles from the past year. Check them out.

1. Assembly of Flexible Circuits

No matter the method, the assembly of electronic flexible circuits is tedious because of its inherent flexible nature. Therefore, we must give extra attention to the assembly process. This article details some of the key considerations when assembling flexible circuits.

2. X-Ray Inspection of Lead and Lead-Free Solder Joints

As aerospace companies consider the shift to lead-free solder alloys and glues, concerns have been raised about whether their current X-ray inspection and quality-control procedures will still be valid. With lead solder, joints are easily interpreted by the operator or the system imaging software because lead provides excellent image contrasts due to relatively high X-ray absorption compared to that of PCB and component materials. Will this hold true as they shift to lead-free solder compounds?

3. Mil/Aero Assembly Success

Davina McDonnell, director of marketing at Michigan-based EMS firm Saline Lectronics, discusses the latest technology and business trends driving the military and aerospace industries, the challenges in these markets—including supply chain issues such as obsolete parts and counterfeit components—and their strategies to stay ahead of the competition.

4. Counterfeit Electronic Components Identification: A Case Study

Counterfeit electronic components are finding their way into today's defense electronics. The problem gets even more complex when procuring diminishing manufacturing source parts. This article provides a brief introduction to counterfeit prevention and detection standards, particularly as they relate to the aerospace and defense sector.

5. Evaluation of the Use of ENEPIG in Small Solder Joints

When soldering to ENEPIG, all of the palladium is dissolved into the solder joint, and creates a palladium-rich region at the base of the solder joint. The shrinking solder joint sizes due to the ever decreasing size of parts cause the relative size of this palladium-rich microstructure to grow relative to the overall joint thickness. This study evaluates the impact of industry standard Pd thicknesses on thin solder joints through shear testing.

6. Metcal Brings Big Science and High Reliability to Hand Soldering

Judy Warner visited the Metcal facility in Southern California and meet with Product Support Engineer Robert Roush. They talked about Metcal's patented hand-soldering technology, which promises to bring a new level of science and control to the world of hand-soldering.

7. Successful, Long-Term Growth at Prime Technological Services

Publisher Barry Matties sat down with Prime Technological Services CEO Greg Chesnutt at IPC APEX EXPO, to glean how they continue to find success and have been able to maintain such an impressive growth rate over the last four years.

8. Reflections on 40 Years of Test and Measurement and What Lies Ahead

Dr. James Truchard, President, CEO, and Cofounder of National Instruments, has penned his reflections on the last 40 years driving and leading some of the greatest progress and innovations the test and measurement industry has seen. In the article, he also leaves us with his thoughts on how he envisions the future to be.

9. Field Failure is Not an Option

Audra Gavelis of IEC Electronics Corp. discusses the current challenges in electronics assembly for the military and aerospace markets and the new requirements they are getting from their customers. She also talks about strategies in dealing with component obsolescence and lifecycle issues, and new compliance issues that contract manufacturers are facing.

10. The Complex World of Soldering

Industry veteran Happy Holden and Saline Lectronics Senior Process Engineer Cathy Cox discuss the various challenges and issues that users face in soldering, including the lack of a "one-size-fits-all" approach in the process, and some key factors that the PCB assembly industry should consider when it comes to different applications and markets.

Share


Suggested Items

Specialty Coating Systems to Present during Machine Design Webinar

09/20/2018 | Specialty Coating Systems
Specialty Coating Systems is pleased to announce that it will participate in the upcoming Machine Design Webinar on Thursday, Sept. 27, 2018 at 2 p.m. EDT.

IMPACT Washington D.C., 2018 with Juki Automation’s Bill Astle

08/01/2018 | Patty Goldman, I-Connect007
I-Connect007's Patty Goldman caught up with Juki Automation’s Bill Astle during a luncheon on the last day of IMPACT Washington D.C., 2018. As a first-time attendee, Bill came away feeling like he made the right connections with key members of Congress, and he looks forward to returning to the event in the future.

Jigar Patel on ZESTRON’s Reliability Solutions for Class 3 Assemblies

06/14/2018 | Patty Goldman, I-Connect007
At the SMTA West Penn Expo, I had a chance to discuss a paper presented by Jigar Patel, senior application engineer at ZESTRON. Jigar explained some of the cleaning challenges with newer components and how ZESTRON helps optimize cleaning processes for their customers.



Copyright © 2018 I-Connect007. All rights reserved.