Still Time to Register for the SMTA Space Coast Expo & Tech Forum


Reading time ( words)

The Space Coast chapter of the Surface Mount Technology Association (SMTA) is inviting the industry to attend its Technical Conference and Exposition, which will be held on January 18, 2018, from 10:0am to 4:00pm, at the Melbourne Auditorium in Melbourne, Florida.

The event will feature technical programs and an exhibition, as well as a soldering challenge.

For more information or to register, click here.

Share


Suggested Items

Creating a Healthy Work Environment

01/19/2018 | Stephen Las Marias, I-Connect007
In an interview with SMT007 Magazine, Wolfgang Koehler, CEO of the North America branch of ULT, discusses how their business has been over the past year, their challenges and opportunities, and how they are helping their customers. Another topic of discussion is investing in new equipment—the key parameters to consider, and what’s driving customers to buy their systems.

PCB Pad Repair Techniques

01/08/2018 | Bob Wettermann, BEST Inc.
There are a variety of reasons behind pads getting "lifted" completely or partially from the laminate of a PCB. Per the just revised IPC-A-610 Revision G, a defect for all three classes occurs when the land is lifted up one or more pad thicknesses. Lifted pads can occur when a device has been improperly removed or there is a manufacturing defect in the board construction. In any case, as with any repair, the ultimate decision on the ability to repair the pad lies with the customer.

Top 10 Most-Read SMT007 Columns of 2017

01/02/2018 | I-Connect007
Another year is over in the SMT industry. 2017 saw a myriad of hot topics, including Industry 4.0, the millennials’ entry into the manufacturing space, and alternative solder materials, to name a few. Without further ado, here are the Top 10 columns from SMT007 over the past year.



Copyright © 2018 I-Connect007. All rights reserved.