Still Time to Register for the SMTA Space Coast Expo & Tech Forum


Reading time ( words)

The Space Coast chapter of the Surface Mount Technology Association (SMTA) is inviting the industry to attend its Technical Conference and Exposition, which will be held on January 18, 2018, from 10:0am to 4:00pm, at the Melbourne Auditorium in Melbourne, Florida.

The event will feature technical programs and an exhibition, as well as a soldering challenge.

For more information or to register, click here.

Share


Suggested Items

Towards a Data-Driven Cleaning Environment

09/19/2018 | Stephen Las Marias, I-Connect007
Tom Forsythe, executive vice president at KYZEN, discusses the most critical challenges of the cleaning process, a new approach to testing the cleanliness of PCB assemblies, and how KYZEN is helping customers develop a more data-driven approach to cleaning.

Whitepaper: Electronics Cleanliness Testing

09/11/2018 | Jason Fullerton, Alpha Assembly Solutions
This paper investigates and compares the performance of no-clean liquid wave soldering fluxes using a commercially available localized extraction and cleanliness testing system, and surface insulation resistance (SIR) testing. Find out which test is suitable for your processes.

Strengthening the Joint with a Revolutionary New Low-Temp Solder Paste

09/05/2018 | Patty Goldman, I-Connect007
I-Connect007 Editor Patty Goldman interviews one of Alpha Assembly Solution’s solder process experts, Traian Cucu, who is based at Alpha’s R&D center in New Jersey. Traian, along with Morgana Ribas, have played key roles in the development of Alpha’s innovation new low-temperature solder paste process. He also talks about how this solves many of the defects issues that one would see on a SAC assembly process.



Copyright © 2018 I-Connect007. All rights reserved.