INSPECTIS Telescopic Table Enhances Working Distance for Inspection


Reading time ( words)

INSPECTIS AB's new HD-050 Telescopic Height Adjustment Table expands the flexibility of working distance achievable with the popular C-12 and U10 (with its supreme 4K resolution) high-performance video microscope inspection systems. The HD-050 also enhances the value and capability of INSPECTIS’s full range of lenses that complement these systems.

Alistair Gooch, marketing manager, says, "Often, having a camera at a fixed position has the advantages of simplicity or stability. However, with a camera at a fixed height, should magnification be required beyond the capability of the internal optical set up, external macro lenses may be needed. Unfortunately, the working distance is reduced proportionally to the power of the optic used. Thus, it becomes necessary to narrow the distance between the object under inspection and the lens to achieve the optimal working distance."

The HD-050 features a 3-stage telescopic post that provides convenient height steps and allows step-less height adjustment between 52 to 155 mm. The object table has the same dimensions and format as the popular HD-029 Tilt table and uses the same proven high quality anti-static coated material as other INSPECTIS accessories including the popular tilt table and X-Y board. The INSPECTIS Telescopic Height Adjustment Table provides 103mm vertical displacement of your inspection objects along optical axis of the digital microscope when +1, +3 and +5 diopter macro lenses are used.

About INSPECTIS AB

INSPECTIS AB is a new line of advanced optical inspection solutions for PCB assembly. INSPECTIS offers a line of plug and play, reliable and cost effective high definition camera microscopes designed for non- contact optical inspection, quality control, repair and rework, and more. For more information, click here.

Share


Suggested Items

PCB Pad Repair Techniques

01/08/2018 | Bob Wettermann, BEST Inc.
There are a variety of reasons behind pads getting "lifted" completely or partially from the laminate of a PCB. Per the just revised IPC-A-610 Revision G, a defect for all three classes occurs when the land is lifted up one or more pad thicknesses. Lifted pads can occur when a device has been improperly removed or there is a manufacturing defect in the board construction. In any case, as with any repair, the ultimate decision on the ability to repair the pad lies with the customer.

Koh Young Europe Ready for Next Year, and Beyond

12/18/2017 | Andy Shaughnessy, I-Connect007
Harald Eppinger, managing director of Koh Young Europe, speaks with I-Connect007 Managing Editor Andy Shaughnessy about the demands of the European market, the company's long-standing success with its solutions, and the future of Koh Young Europe.

Solder Printing Process Inputs Impacting Distribution of Paste Volume

12/14/2017 | Marco Lajoie and Alain Breton, C-MAC Microelectronics
The volume of solder deposition, like any process, has variations that may be characterized by a statistical distribution curve, whether normal or non-normal. As complexity, density, cost and reliability requirements increase, there may be value in narrowing the distribution curve. It is common sense that less variation serves the interest of quality of the more complex and dense circuit boards.



Copyright © 2018 I-Connect007. All rights reserved.