Indium to Feature Ultra-Low Voiding Solder Paste at productronica China 2018


Reading time ( words)

Indium Corporation will feature its new ultra-low voiding Indium10.1HF Solder Paste—which helps customers Avoid the Void—at productronica China 2018, March 14-16, 2018, in Shanghai.

Indium10.1HF is an air reflow, no-clean, halogen-free, Pb-free solder paste specifically formulated to achieve ultra-low voiding, especially in bottom termination component (BTC) assemblies.

Indium10.1HF has a flux chemistry engineered to improve reliability with:

  • High ECM performance under low standoff components, RF shields without proper ventilation, and components in low-clearance cavities
  • Solder beading minimization
  • Very low bridging, slump, and solder balling
  • Excellent wetting to a variety of common fresh and aged metallizations and surface finishes
  • High print transfer efficiency with low variation

Indium10.1HF is compatible with lead-free alloys such as SnAgCu, SnAg, and other alloy systems favored by the electronics industry. This solder paste is halogen-free per IEC 61249-2-21, test method EN 14582.

For more information about Indium Corporation’s low-voiding solder pastes, click here or see Indium Corporation at booth E2.2330.

Share


Suggested Items

Indium on Voiding and Auto Electronics Test Standard

10/09/2018 | Stephen Las Marias, I-Connect007
In this interview with I-Connect007, Indium Corporation Technical Manager Jonas Sjoberg discusses voiding and other key challenges in soldering, as well as an automotive electronics testing standard based out of South Korea that is seeing increased utilization all over Asia. He also talks about the increasing trend in manufacturers moving to Type 5 and Type 6 solder powders, and how this is causing its own set of challenges in printing.

RTW IPC APEX EXPO: Indium's Brook Sandy-Smith on PMI-Squared

05/25/2018 | Real Time with...IPC
Indium Corporation's Brook Sandy-Smith discusses ionic process residues on PCB assemblies and introduces the concept of "PMI-squared" (process material interaction investigation), the topic of an IPC Technical Buzz Session at IPC APEX EXPO 2018.

RTW IPC APEX EXPO: Indium Discusses Fighting Solder Voids

03/06/2018 | Real Time with...IPC
Voiding has increasingly become one of the most critical challenges in the soldering process. In this interview, Christopher Nash, product manager for the PCB assembly solder paste business of Indium, speaks about how the company is helping customers address the voiding challenge.



Copyright © 2018 I-Connect007. All rights reserved.