Vi TECHNOLOGY to Introduce New Sigma Line Module at IPC APEX


Reading time ( words)

Vi TECHNOLOGY will showcase its 5K3D AOI system, 3D SPI system and new software module Sigma Line at the IPC APEX EXPO 2018, which is scheduled to take place February 27–March 1, 2018 at the San Diego Convention Center, California. Vi TECHNOLOGY will be in Booth 3707.

Vi TECHNOLOGY's Sigma Line module offers a real-time combination of 3D SPI and 3D AOI inspection measurements. By considering all inspection systems as one tool, the results is a new way to optimize the SMT process and converge to the zero defect line. Also, it is the prerequisite to transform large volumes of data into actionable data.

The 5K3D is a new patented 3D AOI combination that offers complete defect coverage with high precision metrology. The 5K3D is a 100 percent 3D AOI, it offers a wide range of z-measurement, up to 25mm, while maintaining high accuracy and speed. With limited shadow effect, this new system comes with the best accuracy and repeatability of the market.

About Vi TECHNOLOGY

Vi TECHNOLOGY is a global designer, manufacturer and supplier of a wide range of innovative inspection equipment and software solutions for PCB assembly. Vi TECHNOLOGY serves very demanding market segments including telecoms, consumer, computer, automotive, infrastructure, industrial and medical.

Vi TECHNOLOGY is a member of the Mycronic Group. Mycronic AB is a leading and innovative global high-tech company developing and manufacturing a range of high-precision production equipment and advanced software for the electronics industry. Mycronic AB (publ) is listed on NASDAQ Stockholm, Mid Cap: MYCR.

For more information, click here.

Share

Print


Suggested Items

Flex Circuit Supply Chain Challenges

02/13/2019 | Stephen Las Marias, I-Connect007
In our recent Flex and Rigid-Flex survey, we asked the following question: "Do you have problems with your flex circuit supply chain?" Below are just a few of the explanations of those who answered "Yes", slightly edited for clarity.

RTW IPC APEX EXPO 2019: Electrolube Discusses Overcoming Secondary Cure Issues

02/13/2019 | Real Time with...IPC
Phil Kinner, technical director of Electrolube's coatings division, speaks with I-Connect007 Technical Editor Pete Starkey about how secondary cure issues with UV conformal coatings have been overcome and shows some typical examples.

RTW IPC APEX EXPO 2019: MacDermid Alpha Discusses New Materials to Improve Void Issues

01/30/2019 | Real Time with...IPC
Traian Cucu, Ph.D., G.A.T.E Group Leader at MacDermid Alpha Electronics Solutions, discusses with I-Connect007 Managing Editor Nolan Johnson some of the methods to reduce, or eliminate, the solder voiding issue, especially with the continuing trend towards lower-pitch, high-density components.



Copyright © 2019 I-Connect007. All rights reserved.