Indium Experts to Present at APEX 2018


Reading time ( words)

Several of Indium Corporation’s technical experts will share their expertise at the IPC APEX Expo technical conference on February 27-March 1 in San Diego, California.

Vice President of Technology Dr. Ning-Cheng Lee will lead two presentations during sessions on Alloy Reliability I (S15) and Alloy Reliability II (S23):

  • Sn3.2/Ag0.7/Cu5.5/Sb Solder Alloy With High-Reliability Performance Up to 175°C
  • Low-Temperature Solder Alloys With High-Reliability Performance

Additionally, Eric Bastow, Assistant Technical Manager, America’s Region, and Robert McKerrow, Product Specialist – Engineered Solders will present on:

  • The Effect of a Nitrogen Reflow Environment on the Electrical Reliability of Rosin-Based No-Clean Solder Paste Flux Residue, during a session on Surface Insulation Resistance (S10)
  • Solder Fortification® and Flux-Coated Preforms during the poster presentation sessions on Wednesday, February 28

For more information on the technical and poster sessions offered at IPC APEX, visit www.ipcapexexpo.org.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, click here.

Share


Suggested Items

Tackling Reliability Challenges in Low-Temperature Soldering

07/18/2018 | Barry Matties and Stephen Las Marias, I-Connect007
William Yu, senior technical services manager for Alpha Assembly Solutions, recently shared with I-Connect007 the challenges when it comes to the reliability of low-temperature solder pastes, and soldering strategies to overcome these issues.

Conversation with Miraco… Strategies for Successful Flex Circuit Assembly

07/11/2018 | Stephen Las Marias, I-Connect007
Jason Michaud, a 19-year veteran at Miraco Inc., is the company’s new vice president of sales. In an interview with SMT007 Magazine, Jason speaks about the factors driving the increasing utilization of flexible printed circuits, the challenges in flex circuit assembly, and the best practices to address those issues.

West Penn SMTA: New Leadership, Same Commitment

06/28/2018 | Patty Goldman, I-Connect007
SMTA's new chapter president, Jason Emes, a quality engineer with Pennatronics Corporation enthusiastically discussed with I-Connect007's Patty Goldman the latest goings-on with this Keystone State chapter. He also spoke about his plans and initiatives for the SMTA West Penn Chapter.



Copyright © 2018 I-Connect007. All rights reserved.