STI's Marietta Lemieux to Present at Harsh Environments Conference


Reading time ( words)

STI Electronics Inc. Analytical Lab Manager Marietta Lemieux will present at the Electronics in Harsh Environments Conference, which is scheduled to take place April 24–26, 2018 in Hoofddorp (Amsterdam), Netherlands. The conference will focus on building reliable electronics used in power electronics and harsh environments.

As the manager of STI's Material/Failure Analysis Lab, Lemieux has an extensive background in residue analysis of electronic assemblies. Lemieux will share her knowledge of residue analysis in her presentation, "Does Extraction time in Ion Chromatography affect the Concentration of Ionic Species?"

"Marietta's knowledge of processing residues for electronic assemblies, and in particular, her experience with Ion Chromatography, allows STI to maintain its leadership position in the industry," said Mark McMeen, Vice President, Manufacturing/Engineering Services.

Lemieux oversees the many facets of STI's Analytical Lab and assists customers with the selection of the appropriate service needed from the Analytical Lab. Using the resources in the Analytical Lab, Lemieux has the capability to identify unwanted damage or stress from both external and internal sources, as well as analyze the best possible and least destructive means of correcting the issues at hand.

 

About STI Electronics Inc.

Since 1982, STI Electronics Inc. (STI) has been the premier full-service organization for training, consulting, laboratory analysis, prototyping, and small-to-medium volume contract PCB assembly in the electronics industry. STI also produces a complete line of solder training kits and training support products. For more information, click here.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.