Saki to Demonstrate AOI, SPI, and AXI Software and Systems at IPC APEX EXPO Booth 1127


Reading time ( words)

Saki Corporation will demonstrate its new 5th generation, 3D Automated Optical Inspection (AOI), 3D Solder Paste Inspection (SPI), and 3D Automated X-ray Inspection (AXI) systems and software at the IPC APEX EXPO, February 27-March 1, San Diego, California, Booth 1127. In addition, Saki's 3D AOI system, based on its Quality-Driven Production (QDP) concept for true closed-loop, machine-to-machine communication, will be part of the Fuji SMART Factory Line in booth 3539.

Saki's 3D AOI and SPI systems are the fastest and most accurate 3D inspection and measurement systems in the world, while maintaining position accuracy of 3μm to 9μm at 3σ for 99.7% positioning accuracy. These systems are the first to offer a choice of three resolutions-7μm, 12μm, and 18μm. They can inspect and measure all components, from the very smallest to components 20mm in height, come in both single and dual lanes, and handle all size boards.

For AXI, Saki's 3D BF-3 AXI system is the most accurate 3D AXI system available, achieving 100% head-in-pillow detection and enabling land grid array (LGA) inspection and measurement. It inspects for voids inside the solder joints of insulated gate bipolar transistor (IGBT) modules, which is especially important in the automotive industry.

Quality-Driven Production, Saki's tool for M2M communication, ensures that the data and information that is communicated to third party systems is valid and accurate. A self-diagnostic system with predictive and preventive maintenance management assures stable machine conditions and repeatable, consistent performance. Every key component is monitored, along with system conditions, and a detailed diagnostic log is recorded. Process stability is improved, productivity increased, and equipment operating costs reduced.

"We are excited to be exhibiting at IPC APEX this year," said Satoshi Otake, General Manager, SAKI Americas. "In addition to our new systems, Saki is unveiling and giving demonstrations of our totally new software system. We hope you will come to our booth and give it a try."

About Saki

Since its inception in 1994, Saki has led the way in the development of automated recognition through robotic vision technology. Saki's 3D automated solder paste, optical, and x-ray inspection systems (SPI, AOI, AXI) have been recognized to provide the stable platform and advanced data capture mechanisms necessary for true M2M communication, improving production, process efficiency, and product quality. Saki Corporation has headquarters in Tokyo, Japan with offices, sales, and support centers around the world.

Share

Print


Suggested Items

Mentor and Seica Partner for Data Prep and Testing Big Boards

01/18/2019 | Pete Starkey, I-Connect007
Mark Laing, business development manager of the Valor division at Mentor, a Siemens company, and Luca Corli, director of sales at Seica, speaks with I-Connect007 Technical Editor Pete Starkey about the partnership between their two companies, which enables efficient data preparation for testing big boards, and accelerates new product introduction (NPI) cycles.

Solder Paste Selection/Qualification

01/16/2019 | Stephen Las Marias, I-Connect007
In a recent SMT007 survey, we asked the following question: " What are your challenges when it comes to solder paste selection/qualification?" Here are just a few of the replies, slightly edited for clarity.

Who’s the Best of the Best in Hand Soldering?

01/11/2019 | Nolan Johnson, I-Connect007
IPC APEX EXPO 2019 will include the new IPC World Championship Hand Soldering and Rework Competition on the expo floor on January 29 and 30. Twelve competitors from Britain, China, France, Germany, India, Indonesia, Japan, South Korea, and Thailand will compete for the crown and the title of the first-ever IPC World Hand Soldering and Rework Champion.



Copyright © 2019 I-Connect007. All rights reserved.