RTW IPC APEX EXPO: Kyzen’s Tom Forsythe Talks Tips for Better Cleaning


Reading time ( words)

Tom Forsythe, executive VP of KYZEN, offers his advice on designing for better cleaning. Forsythe also discusses customers' continuing demand for data and KYZEN's data management efforts.

To watch this interview, click here.

 

Share

Print


Suggested Items

Tips & Tricks: Water Contamination and Flux Expiry

04/17/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Solder joints that form properly are not expected to exhibit reduced reliability. However, a higher number of defects created tends to lead to a higher chance that defective connections escape detection through inspection and functional testing, and that’s not a risk to be taken lightly.

Which IPC-A-610 Class is Best for Your PCBA?

04/08/2019 | Neil Sharp, JJS Manufacturing
For many EMS providers, IPC-A-610 is the agreed standard to define what's acceptable and what's not in the world of PCBA production. As an OEM, it's important that you're clear on the basic principles that separate those classes so that you have a clear and realistic expectation of what the results are going to be.

Bill Cardoso Discusses Creative Electron’s Inspection Strategy

04/03/2019 | Tim Haag and Barry Matties, I-Connect007
At PCB West in Santa Clara, California, Dr. Bill Cardoso of Creative Electron held a class on advanced packaging and X-ray inspection strategy. Guest Editor Tim Haag and Publisher Barry Matties met with Bill to further discuss his class and the importance of turning inspection data into information.



Copyright © 2019 I-Connect007. All rights reserved.