RTW IPC APEX EXPO: New Electrolube Developments and Improved Coatings


Reading time ( words)

Electrolube's Phil Kinner discusses new developments in two-component polyurethane conformal coatings, and improved silicone coatings for high-temperature applications.

To watch this interview, click here.


Visit I-007eBooks to download your copy of Electrolube's micro eBook today:
The Printed Circuit Assembler's Guide to...Conformal Coatings for Harsh Environments

Share


Suggested Items

The Authors of the Printed Circuits Handbook 'Speak'

08/30/2016 | I-Connect007
The seventh edition of the Printed Circuits Handbook was published this spring, which was also the 50th anniversary of the first edition. For this issue—“Voices”—we asked the many authors of the handbook for their thoughts—their voices. We asked a few questions to get them started; though not everyone spoke strictly about the handbook, we found their comments interesting and thought-provoking, and we hope you do as well.

A Review of the Opportunities and Processes for Printed Electronics (Part 5): The Future of PE

06/26/2015 | Happy Holden, PCB Technologist-Retired
In the final part of this article series, Happy Holden writes that whether one of the technologies mentioned or technologies yet to be developed will dominate the future of printed electronics is an open question. What is a bit more certain is that flexible base materials printed using printed electronics solutions and processed in roll-to-roll fashion will be an element of successful future technologies.

A Review of the Opportunities and Processes for Printed Electronics (Part 3): Materials, Process Developments

06/24/2015 | Happy Holden, PCB Technologist-Retired
In Part 3 of this article series, Happy Holden highlights the different material and process developments for printed electronics. He also notes how some suppliers have addressed the conductivity problems by using new binder formulations for the ink.



Copyright © 2018 I-Connect007. All rights reserved.