Metcal’s Hand Soldering Experts to Exhibit at SMTA Dallas & Houston Expos


Reading time ( words)

Metcal today announced plans to exhibit at the SMTA Dallas and Houston Expo & Tech Forums. The SMTA Dallas Expo is scheduled to take place Tuesday, April 10, 2018 at the Plano Centre in Plano, Texas. The Houston Expo & Tech Forum will be held Thursday, April 12, 2018 at the Bayou City Event Center in Houston, Texas. The company will show its Connection Validation (CV) Soldering System with new hand-pieces, digital hot air pencil, solder wire feeder and solder tip cleaner. 

CV Soldering System

Connection Validation is Metcal’s latest patented technological innovation that is reinventing hand soldering!  Built on the company’s SmartHeat™ technology used in all Metcal soldering systems, CV evaluates the quality of the solder joint by calculating the intermetallic compound formation and providing closed-loop feedback to the operator, mitigating risk in the process. Metcal will introduce the latest CV system accessories at the show, a full set of hand-pieces including tweezers, desolder and high thermal demand that will transform the CV-5200 soldering system into a complete rework solution.  Additionally, Metcal has released the CV Monitoring Software that will improve your solder process traceability and create a performance baseline to quickly analyze your soldering performance, identify changes in your solder conditions, and allow you to make changes to your process. 

HCT2-200 Digital Hot Air Pencil

Metcal’s new Digital Hot Air Pencil was developed for very small surface mount component and package sizes (1206s and smaller) and low board densities. As component miniaturization continues (e.g. 01005 components), the ergonomics of a pencil become more important to allow a user freedom to access and rework components on the board without affecting adjacent parts. 

Solder Wire Feeder

The Solder Wire Feeder pairs with the MX series soldering and rework systems, speeding up the soldering process and increasing line efficiency by placing more control and convenience in the hands of the operator.

AC-STC Solder Tip Cleaner

Metcal’s innovative Solder Tip Cleaner features a replaceable brush system that pulls excess solder away from the tip into a removable collection tray for disposal while removing oxidation from the tip. Solder tips represent a significant portion of the cost of ownership for a solder station, and Metcal’s new Solder Tip Cleaner removes oxidation and extends the life of the solder tip. By placing the tip into the opening, the AC-STC Solder Tip Cleaner senses the tip and automatically activates, saving the 

About Metcal

Metcal is a benchtop solutions expert that has delivered broad value to customers since its Silicon Valley beginnings in 1982. Offering unrivalled performance, risk mitigation, and ROI, we give electronics manufacturers in automotive, aerospace, medical devices and military sectors the tools—and the confidence—they need to develop faster, safer, more advanced products. Metcal provides advanced technology products across hand soldering, convection rework, fume extraction, and fluid dispensing applications. For more information, click here.

Share


Suggested Items

Alpha Assembly Solutions on Training, Education, and Low-Temperature Soldering

11/07/2018 | I-Connect007 Editorial Team
In this interview, Jason Fullerton of Alpha Assembly Solutions discusses the benefits and challenges of low-temperature soldering. He also highlights the biggest concerns he’s currently seeing in the industry, including young engineers lacking hands-on manufacturing experience and training, voiding and head-in-pillow issues, and low-temperature soldering demands.

Process, Design and Material Factors for Voiding Control for Thermally Demanding Applications

11/06/2018 | Ranjit Pandher, et al., Alpha Assembly Solutions
Solder voiding is a common phenomenon across all semiconductor packaging and electronic board assemblies. There are many factors that influence void frequency and size. This article focuses on several process, design and materials selection considerations which control or potentially reduce voiding to meet industry and end-market acceptance criteria.

I-Connect007 Survey: Inspection Systems to See Increasing Use of 3D Technology

10/31/2018 | Stephen Las Marias, I-Connect007
There is a critical need for inspection in the PCB assembly industry amid the continuing trend towards miniaturization in electronic systems and devices. Further, as solder joints become smaller and fine pitch becomes denser, the use of 3D technologies in inspection systems is becoming a must to help improve the quality and reliability of tests.



Copyright © 2018 I-Connect007. All rights reserved.