SMTA Europe: Electronics in Harsh Environments Conference, Session 5


Reading time ( words)

SMTA Europe announces Session 5 Technical Program on Adhesives and Coatings at the “Electronics in Harsh Environments Conference” to be held in Amsterdam, Netherlands, on April 25, 2018.

Significant performance and reliability challenges exist for harsh environment electronics within the automotive, power electronics, oil & gas, and aerospace applications. Under varying harsh operating environments, the life expectancy of electronic components and systems reduces exponentially if they are not designed, packaged, and protected appropriately. Dr. Rakesh Kumar of Specialty Coatings will present on thermally-stable, vapor-phase conformal coating for protection of electronics in harsh environments.

Highly dense assemblies are commonly packaged in designs that are permeable to moisture. While operating in hostile environments, the thickness and coverage variability of conformal coating over components impacts reliability. Phil Kinner of Humiseal will present research that compares and contrasts coating thickness to help the assembler determine optimum levels needed to withstand harsh environments. The attendee will gain insight into coating types, properties and reliability expectations.

Area array components, such as Ball Grid Arrays (BGAs), Chip Scale Packages (CSPs) and Flip Chip (FCs), then to add complexity to conformal coating processes. Previous studies have shown that the presence of conformal coatings under an area array component can induce solder joint failure. Dave Hillman of Rockwell Collins will present on how conformal coatings impact solder joint integrity of these advanced packaging. The research finds that some of the coating configurations degraded component reliability while others improved reliability.

Share


Suggested Items

Alpha Assembly Solutions on Training, Education, and Low-Temperature Soldering

11/07/2018 | I-Connect007 Editorial Team
In this interview, Jason Fullerton of Alpha Assembly Solutions discusses the benefits and challenges of low-temperature soldering. He also highlights the biggest concerns he’s currently seeing in the industry, including young engineers lacking hands-on manufacturing experience and training, voiding and head-in-pillow issues, and low-temperature soldering demands.

Process, Design and Material Factors for Voiding Control for Thermally Demanding Applications

11/06/2018 | Ranjit Pandher, et al., Alpha Assembly Solutions
Solder voiding is a common phenomenon across all semiconductor packaging and electronic board assemblies. There are many factors that influence void frequency and size. This article focuses on several process, design and materials selection considerations which control or potentially reduce voiding to meet industry and end-market acceptance criteria.

I-Connect007 Survey: Inspection Systems to See Increasing Use of 3D Technology

10/31/2018 | Stephen Las Marias, I-Connect007
There is a critical need for inspection in the PCB assembly industry amid the continuing trend towards miniaturization in electronic systems and devices. Further, as solder joints become smaller and fine pitch becomes denser, the use of 3D technologies in inspection systems is becoming a must to help improve the quality and reliability of tests.



Copyright © 2018 I-Connect007. All rights reserved.