Reading time ( words)
Carlos E. Bouras, general manager of Nordson SELECT, discusses the acquisition of ACE Production Technologies and InterSelect GmbH one year later, along with the synergies between the two companies, and how they have strengthened Nordson SELECT's capabilities.
To watch the interview, click here.
Patty Goldman, I-Connect007
At the SMTA West Penn Expo, I had a chance to discuss a paper presented by Jigar Patel, senior application engineer at ZESTRON. Jigar explained some of the cleaning challenges with newer components and how ZESTRON helps optimize cleaning processes for their customers.
Gregory Vance, Rockwell Automation Inc., and Todd Vick, Universal Instruments Corp.
One of the major challenges for an electronics assembly manufacturing engineer is determining how an SMT machine will impact throughput. Typically, an SMT equipment supplier will ask for a few products to simulate the throughput capability of their machine. Unfortunately, if the engineer works in a high-mix, low-volume environment, he may need to know the impact of a new machine on 1,000 or more products.
Richard Barratt, JJS Manufacturing
The high degree of automation within the SMT methodology offers a variety of advantages, from automatic correction of errors, to simpler and faster assembly, better mechanical performance, increased production rates and reduced labor costs. In this first in a series of articles exploring SMT assembly, we highlight the specific attributes, and the vital importance, of the solder paste printing process for your NPI.