RTW IPC APEX EXPO: MEK on Increasing Demand for THT AOI Systems


Reading time ( words)

Henk Biemans, managing director of MEK Marantz Electronics Ltd, speaks with I-Connect007 Managing Editor Stephen Las Marias about what's driving the increasing demand for THT AOI systems. Other topics discussed include reliability issues, artificial intelligence, and machine learning in inspection systems.

To watch the interview, click here.

Share


Suggested Items

Investigation on the Assembly Process for m03015 and a Brief Look at m0201 Components

11/14/2018 | David Geiger, Robert Pennings, and Jane Feng, Flex
Components continue to shrink in the SMT world, and the next evolution of passive components includes m03015 (009005) and m0201 (008004). The m03015 and the m0201 components will see primary adoption in products that require further miniaturization, which would be SiPs. These modules would then be assembled into products through attachment, another assembly, or via other interconnect methods. This article explores the development of an assembly process (SMT only) for the m03015 component.

Challenges and Opportunities with CFX

11/09/2018 | Stephen Las Marias, I-Connect007
Larry Chen, global marketing supervisor at Taiwan-based Test Research Inc. (TRI), speaks about how the company is supporting IPC’s Connected Factory Exchange (CFX) initiative, the user interest on the standard, the challenges, and his outlook for CFX.

I-Connect007 Survey: Inspection Systems to See Increasing Use of 3D Technology

10/31/2018 | Stephen Las Marias, I-Connect007
There is a critical need for inspection in the PCB assembly industry amid the continuing trend towards miniaturization in electronic systems and devices. Further, as solder joints become smaller and fine pitch becomes denser, the use of 3D technologies in inspection systems is becoming a must to help improve the quality and reliability of tests.



Copyright © 2018 I-Connect007. All rights reserved.