Dual-Use Export Controls Regulation: One to Watch for the Electronics Industry


Reading time ( words)

The European Union is currently working to update its legislation on export controls for dual-use items, meaning items that can be used for both civilian and military applications and/or can contribute to the proliferation of Weapons of Mass Destruction (WMD). Most importantly, the proposal for an updated Regulation introduces the following changes:

  • Expansion of list of dual-use items to include cyber-surveillance technologies and those that can be used for human rights violations.
  • Added obligation for exporters, when conducting their due diligence, to notify Member State authorities, if they suspect exported items not listed in the Regulation are used to violate human rights.
  • The European Commission is empowered to amend the list of dual-use items covered by the Regulation, so continuous monitoring of this process will be needed to ensure regulatory compliance.

The new Regulation does not include any specific mentions of printed circuit boards, but is nevertheless a piece of legislation that IPC members must be aware of, as it could create possible regulatory compliance issues. With that in mind, IPC has drafted a briefing note detailing the new provisions introduced by the Regulation, as well as the state of play and next steps in the legislative process. The updated proposal is currently being discussed by representatives of the European Commission, Council and Parliament in informal “trilogues”. It is possible that the updated Regulation will have gone through the legislative process in the course of 2019.

The more detailed briefing note on the new regulation on export controls on dual-use items can be found here.

IPC members are invited to share their feedback on this document and any other thoughts and concerns they might have on export controls for dual-use items with Chris Mitchell, IPC’s vice president of global government relations, at ChrisMitchell@ipc.org.

Share

Print


Suggested Items

Meet George Milad, I-Connect007 Columnist

10/31/2019 | I-Connect007 Editorial Team
Meet George Milad, one of our newest I-Connect007 columnists! George’s columns will cover PCB plating, IPC specifications, and more. George is the recipient of the 2009 IPC President’s Award, chairs the IPC Plating Committee, and is a permanent member of the IPC Technical Activities Executive Committee.

Communication, Part 4: The Top 5 Causes of Engineering Delays

10/25/2019 | Steve Williams, The Right Approach Consulting LLC
In Part 4 of this series on how PCB fabricators and designers can better communicate, Bob Chandler from CA Design and Mark Thompson from Prototron Circuits address the top five causes of engineer delays.

Happy Holden Previews His AltiumLive Frankfurt Keynote

10/17/2019 | Andy Shaughnessy, I-Connect007
I recently sat down for an interview with Happy Holden, who is slated to give a keynote speech at this year’s AltiumLive event in Frankfurt, Germany. Happy gives a preview of his presentation, which is focused on smart factories and automation, and why artificial intelligence might improve PCB design and fabrication in the future.



Copyright © 2019 I-Connect007. All rights reserved.