Indium’s Solder Paste Wins SMT China Vision Award


Reading time ( words)

Indium Corporation has earned the SMT China Vision Award for its Indium10.1HF Solder Paste on April 24 at NEPCON China.

The SMT China Vision Award recognizes domestic and international companies with innovative products and technologies in SMT methods, processes, materials, equipment, software, and management services. Each product entry was evaluated based on its creativeness, technological advancement, and contributions to help reduce cost, improve quality, increase efficiency, enhance reliability, ensure safety, and protect the environment.

Indium10.1HF is an air reflow, no-clean, halogen-free, Pb-free solder paste specifically formulated to achieve ultra-low voiding, especially in bottom terminated component (BTC) assemblies. 

In addition to the ultra-low voiding, Indium10.1HF has a variety of characteristics that make it the best choice to address the challenges of the industry’s trend toward miniaturization, including:

  • High ECM performance under low standoff components, RF shields without proper ventilation, and components in low-clearance cavities
  • Solder beading minimization
  • Very low bridging, slump, and solder balling
  • Excellent wetting to a variety of common fresh and aged metallizations and surface finishes
  • High print transfer efficiency with low variation

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, click here.

Share


Suggested Items

Greatest Challenges in Soldering

12/12/2018 | Stephen Las Marias, I-Connect007
In a recent SMT007 survey, we asked the following question: "What are your greatest challenges when it comes to soldering?" Here are just a few of the replies, slightly edited for clarity.

Dr. Traian Cucu Discusses Low-Temperature and Lead-Free Soldering

12/14/2018 | Happy Holden, I-Connect007
Dr. Traian Cucu, group leader of the Global Applications and Technologies Expert Group (GATE)—R&D—within Alpha Assembly Solutions, speaks with I-Connect007 Technical Editor Happy Holden about low-temperature and lead-free soldering applications, and the many critical advantages that can achieved by moving to a low-temperature process. They talk about the industry's transition to lead-free, the first, second and third generation of adoption of low-temperature alloys.

Greg Vance on SMTA Ohio Chapter Updates

12/05/2018 | I-Connect007 Editorial Team
This summer, Patty Goldman interviewed Greg Vance, senior project engineer at Rockwell Automation and president of the Ohio chapter, at the SMTA Ohio Valley Expo and Tech Forum in Independence, Ohio. Vance discusses the show, young professionals in the industry, and other events, such as solder paste roundtables.



Copyright © 2018 I-Connect007. All rights reserved.