ZESTRON Academy to Host Free Surface Cleanliness Assessment Webinar


Reading time ( words)

ZESTRON will host the Surface Cleanliness Assessment webinar on Thursday, May 24, from 1:30 PM to 2:30 PM EDT. This is the third installment of the ZESTRON Academy 2018 Cleaning Webinar Series, and will be presented by our industry expert, Umut Tosun, M.S.Ch.E, Application Technology Manager.

How clean is clean? When manufacturing electronic assemblies, impurities left on the board’s surface or underneath the components may lead to field failures. This webinar provides an overview of the methodologies available to properly assess the cleanliness of post-clean assemblies.

Applying the appropriate cleanliness assessment technique is critical to maintaining an in-spec cleaning process. “We invite both new and experienced industry members to attend this free session as we’ll review both direct/indirect measurement methods such as visual inspection, ion chromatography, flux and resin tests,” said Sal Sparacino, Sales and Marketing Manager, ZESTRON Americas.

For more information or to register for this free webinar, visit here.

About ZESTRON

Headquartered in Manassas, Virginia, and operating in more than 35 countries, ZESTRON is the globally leading provider of high precision cleaning products, services and training solutions for the electronics manufacturing industry. With eight worldwide technical centers and the largest team of engineers focused on high precision cleaning, ZESTRON’s commitment to ensuring that its customers surpass even the most stringent cleaning requirements is without equal. 

For additional information and to tour one of our unparalleled technical centers, please click here

Share


Suggested Items

Conversation with Miraco… Strategies for Successful Flex Circuit Assembly

07/11/2018 | Stephen Las Marias, I-Connect007
Jason Michaud, a 19-year veteran at Miraco Inc., is the company’s new vice president of sales. In an interview with SMT007 Magazine, Jason speaks about the factors driving the increasing utilization of flexible printed circuits, the challenges in flex circuit assembly, and the best practices to address those issues.

High School Team's Robotics Entry on Spotlight at Wisconsin Expo & Tech Forum

07/05/2018 | Happy Holden, I-Connect007
In May, I took the opportunity to drive around Lake Michigan and visit the SMTA Milwaukee Chapter’s Wisconsin Expo & Tech Forum. Held at the Crowne Plaza Milwaukee Airport Hotel, this was a well-organized and attended table-top expo and technical forum, with over 60 exhibitors, and a high school team with their FIRST Robotics entry.

Jigar Patel on ZESTRON’s Reliability Solutions for Class 3 Assemblies

06/14/2018 | Patty Goldman, I-Connect007
At the SMTA West Penn Expo, I had a chance to discuss a paper presented by Jigar Patel, senior application engineer at ZESTRON. Jigar explained some of the cleaning challenges with newer components and how ZESTRON helps optimize cleaning processes for their customers.



Copyright © 2018 I-Connect007. All rights reserved.