Thermaltronics Introduces Two Underboard Heater Models


Reading time ( words)

To meet the demands of the industry, Thermaltronics introduces two IR underboard heaters, with either 850 W or 1500 W capacity and a 50°C-400°C temperature range. The only other major differences between the two models are the weight and board size capability.

Rework of power generation boards or those with heatsinks, groundplanes or multi layers can be difficult without some form of preheating. While hot air convection is an acceptable resource for certain rework applications, it is not always the best option. If more accurate requirements must be met, infrared (IR) in conjunction with a CPU is a better choice.

Both units feature CPU-controlled IR heaters with three different heating modes and come with a 3D board holder. External sensors can be used for temperature verification or to control preheater temperature. Heating profiles can be stored for future use and recalled as necessary.

Both units also include an “automatic temperature protection” system that shuts down the power when external sensor temperatures exceed 430°C or the internal sensor reaches 600˚C.

The TMT-PH300 (850 W) and TMT-PH600 (1500 W) come with a one-year warranty and are ESD-safe.

About Thermaltronics

Thermaltronics is a manufacturer and supplier of a wide range of Soldering Products & Accessories used in the electronics manufacturing industry. Design and development is undertaken in the USA and Australia, with final production taking place in a customised manufacturing facility, incorporating specialised equipment and in accordance with recognised international standards of quality and compliance.

In addition to the modern factory, Thermaltronics maintains an office & warehouse in New York State, commercial offices in Hong Kong and a Distribution Sales Office in Perth Australia.

Thermaltronics embraces both strict quality control and conformance with International Manufacturing Standards, is compliant with ISO 9000 & ISO 14000 and holds certification in TuV, GS, NRTL & CE.

Product warranties are among the best in the industry and distribution of the company’s products is available worldwide.

For more information, click here.

Share


Suggested Items

What SMT Component Shortages Mean for Design and Manufacturing Engineers

09/13/2018 | Russell Poppe, JJS Manufacturing
Much has been written about the increasing shortages of electronic components such as MLCCs, chip resistors and other semiconductor devices. And the manufacturing industry is now seeing price increases and greatly extended lead times. It seems the situation is likely to get rapidly worse rather than better. What can we do? Read on.

Demand Forecasting: The Art of Knowing What You Need Before You Need It

08/17/2018 | Patty Rasmussen, East West Manufacturing
Forecasting is a skill born out of experience, intuition, and most of all, knowledge. But what do you need to know when you’re creating an accurate demand forecast? What data is needed? Are there tools you can use? Where do you start? Find out here.

5 Supply Chain Questions to Ask Your Assembly Partner

08/16/2018 | Neil Sharp, JJS Manufacturing
A key question for any OEM who may be considering outsourcing production is whether to maintain its existing supply chain or to hand those crucial purchasing decisions over to its assembly partner. This article highlights five questions to ask a potential assembly partner before handing over the responsibility for your supply chain management.



Copyright © 2018 I-Connect007. All rights reserved.