RTW IPC APEX EXPO: Koh Young Discusses New Equipment and Data Challenges


Reading time ( words)

At the recent IPC APEX EXPO 2018 event in San Diego, California, Joel Scutchfield, Americas Sales Manager for Koh Young, discusses the company's latest inspection equipment and some of the challenges of providing customers the data they need for the real achievement of smart factory realization.

Watch the interview here.

Share


Suggested Items

Modeling an SMT Line to Improve Throughput

06/06/2018 | Gregory Vance, Rockwell Automation Inc., and Todd Vick, Universal Instruments Corp.
One of the major challenges for an electronics assembly manufacturing engineer is determining how an SMT machine will impact throughput. Typically, an SMT equipment supplier will ask for a few products to simulate the throughput capability of their machine. Unfortunately, if the engineer works in a high-mix, low-volume environment, he may need to know the impact of a new machine on 1,000 or more products.

RTW IPC APEX EXPO: Indium's Brook Sandy-Smith on PMI-Squared

05/25/2018 | Real Time with...IPC
Indium Corporation's Brook Sandy-Smith discusses ionic process residues on PCB assemblies and introduces the concept of "PMI-squared" (process material interaction investigation), the topic of an IPC Technical Buzz Session at IPC APEX EXPO 2018.

RTW IPC APEX EXPO: Inspection Technology Developments

05/22/2018 | Real Time with...IPC
Brian D'Amico, president of Mirtec Corp., speaks with I-Connect007 Technical Editor Pete Starkey about the challenges of miniaturization, increasing component density, and the shadowing of small components by taller ones, and how Mirtec has developed its inspection technology to ensure they remain at the leading edge.



Copyright © 2018 I-Connect007. All rights reserved.