RTW NEPCON China: Armada Discusses Impact of Auto Electrification on PCB Assembly


Reading time ( words)

Shanghai-based Armada Trade and Development Co. Ltd is the exclusive distributor of stencils manufacturer Christian Koenen GmbH in China. In this interview during NEPCON China 2018, Klaus Schubert, managing director of Armada, speaks about the increasing electrification in cars and how this is impacting the PCB assembly processes, and in particular, the solder paste printing.

He also discusses their stencil technology that ensures accurate paste release and helps customers to achieve first-pass yields.

Watch the interview here.

Share

Print


Suggested Items

Impact of Stencil Foil Type on Solder Paste Transfer Efficiency for Laser-cut SMT Stencils (Part 2)

05/08/2019 | Greg Smith, BlueRing Stencils
In the first part of this two-part article, Greg Smith talks about a study wherein a test vehicle was created to show transfer efficiency over a wide array of area ratios. Part 2 discusses the results of the experiment, including discussions of the different SEM results featuring the paste transfer efficiencies of each material, to better understand how the aperture wall surface smoothness compares to SMT stencil performance.

Impact of Stencil Foil Type on Solder Paste Transfer Efficiency for Laser-cut SMT Stencils (Part 1)

04/24/2019 | Greg Smith, BlueRing Stencils
As innovation and demand continue to drive miniaturization in electronics, manufacturers face the constant challenge of assembling smaller and smaller components with repeatable processes and high yields. Stencil printing is the first step in the PWB assembly process, and improvements to the SMT stencil can significantly improve yields, especially for more challenging miniaturized products.

Tips & Tricks: Humidity Level for Electronics Assembly

04/10/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Low relative humidity (RH) can allow for higher static charges to build on objects. It can also affect solder pastes, especially OR-class pastes, and this can reduce print performance and stencil life. Read on to find out what level of RH you need for your assembly facility.



Copyright © 2019 I-Connect007. All rights reserved.