The Right Approach: I Hear the Train A Comin'
It’s Only Common Sense: OCCAM—the Time Is Now
Marcy's Musings: The Growing IndustryNow Available: The June 2018 Edition of PCB007 Magazine
June 12, 2018 | I-Connect007Estimated reading time: Less than a minute
Much like the ubiquitous rubber ducky, it seems that PCB manufacturing has not changed much through the decades, but what has changed is the required precision of those steps to achieve ever finer features at ever higher quality and reliability.
For the June 2018 issue of PCB007 Magazine, our experts offer up new wet processes, and tips and best practices for successful plating, and more.
Check out this month's PCB007 Magazine, now on the virtual newsstand and available for delivery in your e-mailbox each month by subscribing here.
Be sure to download the PDF copy for future reference.
Share on:
Suggested Items
Real Time with... IPC APEX EXPO 2024: Final Finishes and IC Substrate Manufacturing
04/24/2024 | Real Time with...IPC APEX EXPOEditor Marcy LaRont and Richard DePoto, Uyemura's Business Development Manager, engage in a comprehensive discussion about the positive aspects of the show, the benefits of RAIG in final finishes, and the hurdles faced when upgrading your surface finish. Also discussed are the role of Uyemura's MEC pretreatment agents in IC substrate manufacturing and the importance of collaboration and knowledge sharing.
Uyemura Boosts Field and Met Lab Teams
02/21/2024 | UyemuraUyemura has announced an important field promotion, and a new addition to its Connecticut Tech Center Engineering Team. Both actions are in support of the company’s increasing focus on IC substrates, and its role as a supplier to wafer manufacturers, semiconductor fabs and PWB customers.
Uyemura Expands Technical Service Capacity in the Northeast
01/09/2024 | UyemuraKatarina Roy has been appointed Technical Service Engineer, expanding Uyemura’s technical resources in the US northeast and the province of Ontario. She will work from Andover, MA. and the Uyemura Tech Center in Southington, CT.
I-Connect007 Columnist George Milad Passes Away
12/20/2023 | I-Connect007 Editorial TeamI-Connect007 columnist George Milad passed away on Dec. 7, 2023, at the age of 81. George was well-known in the PCB industry for his technical expertise in physical organic chemistry. He was employed as a national accounts manager at Uyemura International Corporation, was the author of the chapters on plating and surface finishing in Printed Circuit Handbook: Seventh Edition, and had a series of publications on electrolytic plating and metallic surface finishes.
Uyemura Expands Senior Leadership Team
12/15/2021 | UyemuraUyemura, a world leader in specialty surface technologies, has announced a landmark expansion of its senior leadership team.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in