AIM Solder Celebrates Soldadura de Mexico's 20th Anniversary


Reading time ( words)

AIM Solder is celebrating the 20th anniversary of AIM Soldadura de Mexico. AIM opened this facility in 1998 to support Mexico's growing assembly industry. Since then, AIM Soldadura de Mexico has grown into one of the largest and most prestigious solder manufacturers in Mexico.

AIM was the first manufacturer of solder paste, wire, bar, and liquid flux within Mexico. Since opening its doors in 1998, AIM Soldadura de Mexico has expanded, adding additional manufacturing lines and large, state-of-the-art research and development and applications laboratories, further securing its position as a leader in the Mexican market.

AIM celebrated its 20 years of continued success with a factory tour and appreciation dinner for customers and employees.

"We have arrived at this point in our history as a result of the incredible passion and devotion of our employees, and the continued loyalty of our valued customers. We have a deep appreciation for everything that these two critical groups represent to our company's ongoing success, and we look forward to continuing to build an enterprise that rewards everyone associated with it," said Ricky Black, president of AIM Solder.

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, click here.

Share

Print


Suggested Items

Surface Treatment Enabling Low-Temperature Soldering to Aluminum

07/15/2019 | Divyakant Kadiwala, Averatek Corporation
An increasingly popular method to meet the need for lower cost circuitry is the use of aluminum on polyester (Al-PET) substrates. This material is gaining popularity and has found wide use in RFID tags, low-cost LED lighting, and other single-layer circuits. However, both aluminum and PET have their own constraints and require special processing to make finished circuits.

Failures and Reliability in Soldering

07/09/2019 | Michael Gouldsmith and Zen Lee, Thermaltronics
The definition of failure is "the lack of success in doing or achieving something, especially in relation to a particular activity." If the activity is concerning a soldering process, such a failure can have a downstream impact far beyond the actual solder joint. In this regard, it is first necessary to understand what constitutes a good solder joint because appearance is too often deemed a success.

Size Matters: The Effects of Solder Powder Size on Solder Paste Performance

07/08/2019 | Tony Lentz, FCT Assembly
Solder powder size is a popular topic in the electronics industry due to the continuing trend of miniaturization of electronics. And the question commonly asked is, "When should we switch from Type 3 to a smaller solder powder?" Read more to find out.



Copyright © 2019 I-Connect007. All rights reserved.