Zestron Academy to Host Free Cleaning for Reliability Webinar


Reading time ( words)

Zestron will host the "Cleaning for Reliability - Overcoming Challenges for Class III Assemblies" webinar on July 26, from 1:30 PM to 2:30 PM EDT. This is the fifth installment of the Zestron Academy 2018 Cleaning Webinar Series, and will be presented by Senior Application Engineer Ravi Parthasarathy, M.S.Ch.E.

When designing Hi-Rel electronic assemblies, functionality is critical and long-term reliability is essential. This webinar provides an overview of the various failure mechanisms including the challenges associated with improper cleaning, board complexity, material mix, component and package types used. Steps to reduce the risk of failure and improve the long-term reliability will be presented. Case studies will be reviewed.

"We invite both new and experienced industry members to attend this free webinar as we'll review the importance of understanding the failure mechanisms and corrosion types to resolve cleanliness issues," said Sal Sparacino, Sales and Marketing Manager, Zestron Americas.

About ZESTRON

Headquartered in Manassas, Virginia, and operating in more than 35 countries, ZESTRON is the globally leading provider of high precision cleaning products, services and training solutions for the electronics manufacturing industry. With eight worldwide technical centers and the largest team of engineers focused on high precision cleaning, ZESTRON’s commitment to ensuring that its customers surpass even the most stringent cleaning requirements is without equal.

For additional information and to tour one of our unparalleled technical centers, please visit www.zestron.com.

Share

Print


Suggested Items

Cavity Board SMT Assembly Challenges (Part 2)

07/03/2019 | Dudi Amir and Brett Grossman, Intel Corporation
This article describes the details of a study of assembling SiP BGA packages into a cavity. It points out the challenges involved in the board cavity design and assembly of components in a cavity. The authors discussed the board design challenge of having a cavity and defining the proper depth of the cavity to accommodate the board fabricator, the product design, and the SMT assembly.

Clean vs. No-clean Solder Process

07/03/2019 | Russell Poppe, JJS Manufacturing
Although IPC suggests clear guidelines, agreeing on the cleanliness (or otherwise) of a PCB assembly can often be a subjective and even contentious subject within the electronics manufacturing industry. If you’ve chosen to outsource your assemblies, how do you decide what to specify to your EMS partner? Find out here.

Tips & Tricks: Water Contamination and Flux Expiry

04/17/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Solder joints that form properly are not expected to exhibit reduced reliability. However, a higher number of defects created tends to lead to a higher chance that defective connections escape detection through inspection and functional testing, and that’s not a risk to be taken lightly.



Copyright © 2019 I-Connect007. All rights reserved.