AIM to Feature REL61 at the SMTA Ohio Expo & Tech Forum


Reading time ( words)

AIM Solder will highlight its novel REL electronic solders, REL22 and REL61, at the SMTA Ohio Expo & Tech Forum, scheduled to take place on July 12, 2018 at Embassy Suites Cleveland Rockside in Independence, Ohio.

AIM’s new alloys provide the PCB assembly industry with unique solutions to address the limitations of current industry offerings. REL22 is an award-winning, high reliability alloy with durability characteristics that double the reliability of SAC305 in harsh environments. REL61 is a low silver solder alloy that solves the process challenges associated with many other low/no silver solder alloys. With a 10°C lower melting temperature and superior wetting performance versus SAC305, REL61 can lower process temperatures, prevent PCB damage, and reduce costs and waste. AIM's REL alloys are available in paste, wire and bar formats and are engineered for reliability, usability, and cost effectiveness.

Along with their REL alloys, AIM will showcase its full line of advanced solder materials, including its solder pastes, liquid fluxes, tin/lead and lead-free alloys. To discover all of AIM's products and services, visit the company at the SMTA Ohio Expo & Tech Forum for more information and to speak with one of AIM’s knowledgeable staff members.

Upcoming Events

August 9, 2018 - SMTA Tijuana – Tijuana, BC Mexico

August 16, 2018 - SMTA Queretaro Roundtable – Hotel Misión Juriquilla, Querétaro, Mexico

August 23, 2018 - SMTA Capital - Kossiakoff Center, Laurel, Maryland

Share

Print


Suggested Items

Blackfox Trains Veterans for Good Manufacturing Jobs

02/18/2020 | Real Time with...IPC
Blackfox Training Institute has been training manufacturing technologists for over 20 years. Based in Longmont, Colorado, Blackfox is now focused on helping veterans of our armed services transition into good jobs in the manufacturing sector. During IPC APEX EXPO 2020, Editor Nolan Johnson spoke with Blackfox CEO Al Dill about the company's veteran training programs, and how this effort is helping companies fill jobs that might otherwise go unfilled.

Solder in PCBA: Can’t Live Without It... or Can We?

02/17/2020 | Joe Fjelstad, Verdant Electronics
For most of its historical use in electronics, the solder alloy of choice was tin-lead, either an Sn60/Pb40 alloy or the Sn63/ Pb37 eutectic version of the tin-lead alloy. These two alloys were the workhorses of the industry. They were both well understood in terms of their processing and reliability—that is, until the advent of lead-free, a well-meaning but ill-conceived and poorly executed conversion, forced on the industry by the European Union in 2006.

IPC APEX EXPO 2020 Attendees Speak: Dr. Martin Anselm

02/14/2020 | I-Connect007 Editorial Team
"The biggest challenge I’ve encountered a number of different times is the migration to much larger packaging," said Dr. Martin Anselm, director of CEMA Lab. "Devices are getting much larger, and with the thousands of I/O of solder joints, and they are not just single-die, multi-chip modules in different forms or 2.5D technologies.



Copyright © 2020 I-Connect007. All rights reserved.