Nordson ASYMTEK Combines Conformal Coating and Inspection into One Automated System


Reading time ( words)

Nordson ASYMTEK, a Nordson company, announces an automated coating inspection (ACI) line combining its Select Coat® SL-940 Conformal Coating system with the FX-940UV Series ACI/AOI automated conformal coat inspection system. Together, the systems ensure a conformal coating process that's accurate and reliable, and delivers ongoing coating quality and consistency.

Eliminating coating problems starts with a high-quality conformal coating system with process controls. The Nordson ASYMTEK Select Coat SL-940 conformal coating system provides the highest quality and productivity for automated coating processes. The system has a wide range of features to monitor and control the process and to provide traceability, such as Fan Width Control, Viscosity Control, Flow Monitoring, a bar code system, and a vision system. Information can be exchanged with customer-specific Factory Information Systems (FIS) and Manufacturing Execution Systems (MES) to ensure factory production workflow.

Conformal coatings used by electronic manufacturers contain UV indicators for the purpose of inspection. Since coatings are transparent, parts must be viewed under ultraviolet or black light to verify coverage and non-coverage. The FX-940UV's advanced, high-power UV lighting and newly available image-processing technology integrate several techniques, including coverage and color inspection, normalized correlation, and rule-based algorithms to provide complete inspection coverage with an unmatched low false-failure rate. Advanced multiple-camera imaging technology offers high-speed inspection with defect coverage. The FX-942 model provides dual-sided viewing (top-down and bottom-up) cameras. The ACI/AOI systems inspect conformal coating coverage and verify correct part assembly in SMT or through-hole applications, improving quality and enhancing yield.

With minimal programming, the inspection set-up is fast and intuitive, typically requiring less than 30 minutes. A known-good board is used to teach the coverage and non-coverage areas. Automated inspection typically takes only a few seconds and results are immediately displayed. These results can be stored and reviewed off-line. The FX-940UV also reads all common barcodes and captures board images for product traceability.

Configurable for several line positions, the FX-940UV ACI series is equally effective for coating, pre- and post-cure, and final assembly inspection. Off-line programming maximizes machine utilization and real-time SPC monitoring provides a valuable yield enhancement solution. The FX-940UV can be fully integrated with a FIS/MES system to capture up-to-the-minute process data. Single-page, quick feedback reports provide an overall view of the inspected board and allow you to zoom in on specific areas of interest, such as around keep out zones and critical components.

Together, Nordson ASYMTEK's Select Coat® SL-940 conformal coating system and FX-940 ACI can team up for coating that is done accurately and reliably.

About Nordson ASYMTEK

Nordson ASYMTEK, a world leader in precision fluid dispensing, conformal coating, and jetting technologies, designs and manufactures dispensing and coating systems, supported by an award-winning global applications and service network for over 35 years. To find out more, visit www.NordsonASYMTEK.com, or on social media. For more information, click here.

About Nordson Corporation

Nordson Corporation engineers, manufactures, and markets differentiated products and systems that precisely dispense adhesives, coatings, sealants, biomaterials, polymers, plastics, and other materials, fluid management, test and inspection, UV curing, and plasma surface treatment, all supported by application expertise and direct global sales and service. Nordson serves consumer non-durable, durable and technology end-markets including packaging, nonwovens, electronics, medical, appliances, energy, transportation, construction, and general product assembly and finishing. Founded in 1954, headquartered in Westlake, Ohio, Nordson has operations and offices in nearly 40 countries. Visit Nordson, click here.

Share

Print


Suggested Items

Solder Paste Printing From the Stencil’s Perspective

02/19/2020 | I-Connect007 Editorial Team
Jeff Schake of ASM Assembly Systems discusses the complications surrounding printing and solder paste that he sees from his perspective as a stencil expert.

PCB Repair: Thoughtful Best Practices

12/31/2019 | Barry Matties, I-Connect007
Barry Matties recently spoke with Curtis Smith of Huntron about the critical factors that somebody needs to understand about the plant maintenance regarding the PCB repair process. The PCB repair process is not just a matter of just getting the equipment anymore but finding the right people with a troubleshooting mindset that can do it. A failed PCB can bring down an entire manufacturing line, and companies need to be able to repair the board and keep their manufacturing going.

Book Summary: The Printed Circuit Assembler’s Guide to…Process Validation

12/19/2019 | I-Connect007 Editorial Team
The latest book in I-Connect007’s "The Printed Circuit Assembler’s Guide to…" series is authored by Gen3’s Graham Naisbitt. With his deep background in process validation and standards work, Naisbitt is uniquely qualified to explore achieving acceptable electrochemical reliability using both CAF and SIR testing. This eBook is a perfect present for the holidays.



Copyright © 2020 I-Connect007. All rights reserved.