Indium’s Dr. Lee to Present at IEMT Conference in Malaysia


Reading time ( words)

Indium Corporation expert Dr. Ning-Cheng Lee, vice president of technology, will deliver two presentations and lead a course at the 38th International Electronics Manufacturing Technology (IEMT) Conference in Melaka, Malaysia on September 4-6.

Dr. Lee will present "Assessment of Solder Paste Technology Limitation in Miniaturization for SiP and SMT Applications." The paper examines the performance of solder paste in producing a strong joint by analyzing pitch dimension, powder size, residue levels, flux capacity, oxygen barrier, alloy dopants, and more.

Dr. Lee will also present "Nano-Cu Sintering Paste for High-Power Devices in Die-Attach Applications," which details the development of a nano-Cu sintering material that enables the pressureless process needed for small chips and combats the oxidation typically seen with Cu-materials during storage and handling.

"Electromigration – The Hurdle for Miniaturization and High-Power Devices" is a three-hour course designed to help attendees achieve long solder joint life under high-stress conditions. It will cover all critical aspects of electromigration in solder joints, including failure mechanisms, effects of solder alloy composition, solder joint metallurgy and configuration, pad design and composition, temperature, current polarity, and more.

Dr. Lee is a world-renowned soldering expert, an SMTA Member of Distinction, and an IEEE Fellow. He has extensive experience in the development of fluxes, alloys, and solder pastes for SMT, as well as in the development of high-temperature polymers, encapsulants for microelectronics, underfills, and adhesives. In addition to SMT and semiconductor soldering materials, his research also extends to nanobonding technology and thermal conductive materials.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, click here.

Share


Suggested Items

What's the Scoop? APEX CFX Showcase

05/03/2018 | Philip Stoten, Scoop
The IPC Connected Factory Exchange (CFX) demo at the recent IPC APEX EXPO 2018 trade show in San Diego, California, is a great example of industry collaboration. The CFX Showcase at APEX had 245,000 CFX website page views; 701,200 CFX messages transmitted; and 664.5 million bytes of data exchanged; and the whole thing was pulled together in a matter of weeks. Here's what the participants in the program have got to say.

RTW IPC APEX EXPO: COMET Technologies Highlights Product Range and New Facility

03/12/2018 | Real Time with...IPC
Craig Arcuri of COMET Technologies details the numerous ways his company's technology is employed to manufacture and inspect a wide range of products, from chips to jet engine turbine blades. He also speaks about Lab One, the company's new technology and application center in Silicon Valley.

Mycronic Announces the Acquisition of Vi TECHNOLOGY

02/21/2018 | Barry Matties, I-Connect007
Mycronic recently announced the acquisition of Vi TECHNOLOGY, with the intent of combining VIT’s inspection technology with Mycronic’s jetting capabilities. In an interview with I-Connect007, Olivier Pirou, Managing Director of VIT, discusses more about the merger and how this will help VIT contend in such a competitive environment.



Copyright © 2018 I-Connect007. All rights reserved.