CyberOptics to Demo Best-In-Class Inspection Technologies at NEPCON South China


Reading time ( words)

CyberOptics Corp. will demonstrate the MRS-enabled SQ3000 with multi-process capabilities including 3D AOI, SPI and CMM applications at NEPCON South China, to be held at the Shenzhen Convention Center on August 28–29, 2018. CyberOptics will be in Booth 1J45.

The SQ3000 features the Multi-Reflection Suppression (MRS) sensor technology that meticulously identifies and rejects reflections caused by shiny components and surfaces. Effective suppression of multiple reflections is critical for highly accurate measurement, making the proprietary MRS technology an ideal solution for a wide range of applications with exacting requirements.

Widely used for 3D AOI, the SQ3000 can now be used for 3D SPI—even on the smallest paste deposits. Combined with the award winning, easy-to-use software, solder paste inspection has reached a new level of precision for the most stringent requirements.

Additionally, the SQ3000 can be used to attain highly accurate coordinate measurements faster than a traditional Coordinate Measurement Machine (CMM). It includes a comprehensive software suite for use in industrial metrology, semiconductor, microelectronics and SMT applications.

About CyberOptics

CyberOptics Corporation (www.cyberoptics.com) is a leading global developer and manufacturer of high precision sensing technology solutions. CyberOptics’ sensors are used in SMT, semiconductor and metrology markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of key vertical markets. Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe. For more information, click here.

Share

Print


Suggested Items

Flex Circuit Supply Chain Challenges

02/13/2019 | Stephen Las Marias, I-Connect007
In our recent Flex and Rigid-Flex survey, we asked the following question: "Do you have problems with your flex circuit supply chain?" Below are just a few of the explanations of those who answered "Yes", slightly edited for clarity.

RTW IPC APEX EXPO 2019: Electrolube Discusses Overcoming Secondary Cure Issues

02/13/2019 | Real Time with...IPC
Phil Kinner, technical director of Electrolube's coatings division, speaks with I-Connect007 Technical Editor Pete Starkey about how secondary cure issues with UV conformal coatings have been overcome and shows some typical examples.

RTW IPC APEX EXPO 2019: MacDermid Alpha Discusses New Materials to Improve Void Issues

01/30/2019 | Real Time with...IPC
Traian Cucu, Ph.D., G.A.T.E Group Leader at MacDermid Alpha Electronics Solutions, discusses with I-Connect007 Managing Editor Nolan Johnson some of the methods to reduce, or eliminate, the solder voiding issue, especially with the continuing trend towards lower-pitch, high-density components.



Copyright © 2019 I-Connect007. All rights reserved.