PVA Brings Advanced Coating/Dispensing Equipment to The Battery Show


Reading time ( words)

PVA will exhibit at The Battery Show, scheduled to take place September 11-13, 2018 at the Suburban Collection Showplace in Novi, Michigan. The company will showcase its PV202K-TCM Cartridge Metering System and Delta 8 Selective Coating/Dispensing System in Booth #1348 and supply Parker Chromerics with a Delta 6 Selective Coating / Dispensing System and 1GPU Hydraulic Metering Pump in Booth #201.

The PV202K-TCM metering system is a cost-effective meter mix system for dispensing two component thermally conductive materials that contain abrasive fillers. The system operates by metering material directly from disposable plastic cartridges via a linear drive. As the drive advances, material is positively displaced to the two-part dispense valve. There are no pumps or seals to wear out providing a low maintenance solution.

The Delta 8 maintains the preferred features of previous workcells, and features a robust overhead three-axis motion platform suitable for inline or batch operations. Improved structural and gantry rigidity have been added for robustness and easier access. Delta 8 has a maximum acceleration of 0.5g, and a footprint 1046 mm x 1270 mm x 2350.9 mm (41.18" x 50.0" x 92.56").

The Delta 6 shares the same features as the Delta 8, but has been designed with a slimmer footprint of 847 x 1136.9 x 1606 mm (33.35 x 44.76 x 63.23"), and a maximum acceleration of 1g.

The PVA-1GPU one-gallon hydraulic metering pump is ideal for dispensing highly abrasive, highly viscous pastes and compounds packaged in one-gallon metal pails. The pump extrudes material from the pail rather than pumping it like a typical reciprocating pump. The extrusion process minimizes shear and maintains material integrity.

About PVA

PVA is a global supplier of conformal coating systems, innovative fluid dispensing solutions and precision valve technology. PVA’s customer driven solutions are utilized worldwide in industries ranging from solar, semiconductor packaging, printed circuit board assembly, medical device manufacturing, and consumer electronics. Throughout the changing global manufacturing landscape, PVA remains committed to providing our customers with exceptional products and industry-leading global support.

For further information please click here.

Share


Suggested Items

ASM Assembly Solutions on CFX

07/16/2018 | Barry Matties, I-Connect007
ASM Assembly Solutions was one of the 30+ companies participating in IPC's CFX (Connected Factory Exchange) showcase at the recent SMT Hybrid Packaging show in Nuremberg, Germany. In this interview, ASM's Thomas Marktscheffel shared his perspective on CFX and its current challenges, and dispelled the notion that CFX might be a cookie-cutter approach to the smart factory.

Optimal Electronics Sets Sight on Growth

11/14/2017 | Stephen Las Marias, I-Connect007
In an interview with SMT Magazine, Dr. Ranko Vujosevic, CEO and CTO of Optimal Electronics, speaks about the latest technology developments at his company, and his plans to sustain growth. He also talks about his paper on lights-out electronics assembly, the technologies that would support this vision, and the ultimate goal of Industry 4.0.

Koh Young Discusses Latest 3D AOI Innovations

06/16/2017 | Stephen Las Marias, I-Connect007
Koh Young Technology's Scott Kim, overseas sales team manager, talks about the latest challenges and developments happening in inspection technologies, the new demands and requirements from customers, as well as the key factors to consider when it comes to buying inspection systems.



Copyright © 2018 I-Connect007. All rights reserved.