-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Thermal Capabilities of Solder Masks: How High Can We Go?
August 24, 2018 | Sven Kramer, Lackwerke PetersEstimated reading time: 2 minutes
Abstract
This article focuses on three different coating material groups that were formulated to operate under high thermal stress and are applied at the printed circuit board manufacturing level. While used for principally different applications, these coatings have in common that they can be key to a successful thermal management concept especially in e-mobility and lighting applications. The coatings looked at consist of: Specialty (green transparent) liquid photoimageable solder masks (LPiSM) are compatible with long-term thermal storage/stress in excess of 150°C. Combined with the appropriate high-temperature base material, and along with a suitable copper pre-treatment, these solder resists are capable of fulfilling higher thermal demands placed on them. In this context, long-term storage tests as well as temperature cycling tests were carried out. Moreover, the effect of various copper pre-treatment methods on the adhesion of the solder masks was examined at 150, 175 and 200°C over the aging process. For this purpose, test panels were stored for 2000 hours at the respective temperatures and were submitted to a cross-cut test every 500 hours. Within this test set-up it was found that a multi-level chemical pre-treatment gives significantly better adhesion results, in particular at 175°C and 200°C, as compared to a pretreatment by brush or pumice brush. Breakdown voltage as well as tracking resistance were also studied.
For an application in LED technology, the light reflectivity and white colour stability of the printed circuit board are of major importance, especially when high-power LED are used which can generate larger amounts of heat. For this reason, a very high coverage power and an intense white colour with high reflectivity values are essential for white solder masks. These “ultra-white” and largely nonyellowing LPiSM need to be able to withstand specific thermal loads, especially in combination with high-power LED lighting applications.
Introduction
The demands and loads placed on photoimageable solder masks rise to unknown new levels. Today’s solder masks are already exposed to a considerable level of thermal stress, high humidity and/or condensation. Especially in automotive electronics, the level specified for thermal resistance and thermal cycling resistance is constantly increasing. Due to higher currents and applications mounted in the engine compartment/gear box or close to the exhaust system, common photoimageable solder masks reach their performance limits. The thermal stress resulting from higher operating temperatures triggered the development of new solder masks or further development of existing solder masks. Here the level demanded by the industry in terms of permanent high temperature loads is typically 175°C.
To read the full version of this article which originally appeared in the July 2018 issue of PCB007 Magazine, click here.
Suggested Items
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.
TE Connectivity Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/09/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that TE Connectivity has finalized the purchase of a Pulsar solderability testing system.