Rehm Presentation Draws Crowd at SbSTC in Wuhan


Reading time ( words)

Rehm Thermal Systems, the specialist for thermal system solutions, recently participated in the SbSTC New Technology Seminar in Wuhan, China. More than 300 experts from all over the country exchanged views on topics related to research and application of SMT technology.

SbSTC Wuhan02.jpgWang Yu, Sales Director of Rehm Region East China, was one of the presenters. His presentation on “Void-free soldering with vacuum soldering systems” with numerous case studies aroused considerable interest among the audience, which included many manufacturers of electronic components. At its info point, Rehm informed the trade visitors about the technical details and advantages of its solutions. One of the main focuses was the demonstration of the VisionXP reflow soldering system. It guarantees both flexibility and high capacity and can therefore perfectly meet the constantly growing demands.

There is a good reason for participating in events in Asia: The strong economic growth of the countries there brings with it an increasing demand from plenty of industries, including the automotive, consumer electronics, medical technology and automation sectors. This is where Rehm comes in and shows how the production of electronic assemblies can be solved in a modern and economical way.

SbSTC Wuhan01.jpgWang Yu drew a positive conclusion: “This seminar fully met our expectations in terms of quantity and quality of participants. In future, we will increasingly cooperate with the SbSTC Conference Group to carry out personal exchange with our customers. We will discuss various technical challenges in the industry together with our partners. Our clear goal is to make consistent progress in technological research and development and thereby ensure the continuous development of our products.”

About Rehm Thermal Systems

As a specialist in thermal system solutions for the electronics and photovoltaics industry, Rehm is a technology and innovation leader in state-of-the-art, cost-effective manufacturing of electronic assemblies. As a globally active manufacturer of reflow soldering systems with convection, condensation and vacuum, drying and coating systems, functional test systems, equipment for metallisation of solar cells as well as numerous customised systems, we have a presence in all key growth markets and, as a partner with more than 25 years of industry experience, are able to implement innovative production solutions that set new standards.

Share

Print


Suggested Items

Flex Circuit Supply Chain Challenges

02/13/2019 | Stephen Las Marias, I-Connect007
In our recent Flex and Rigid-Flex survey, we asked the following question: "Do you have problems with your flex circuit supply chain?" Below are just a few of the explanations of those who answered "Yes", slightly edited for clarity.

RTW IPC APEX EXPO 2019: Electrolube Discusses Overcoming Secondary Cure Issues

02/13/2019 | Real Time with...IPC
Phil Kinner, technical director of Electrolube's coatings division, speaks with I-Connect007 Technical Editor Pete Starkey about how secondary cure issues with UV conformal coatings have been overcome and shows some typical examples.

RTW IPC APEX EXPO 2019: MacDermid Alpha Discusses New Materials to Improve Void Issues

01/30/2019 | Real Time with...IPC
Traian Cucu, Ph.D., G.A.T.E Group Leader at MacDermid Alpha Electronics Solutions, discusses with I-Connect007 Managing Editor Nolan Johnson some of the methods to reduce, or eliminate, the solder voiding issue, especially with the continuing trend towards lower-pitch, high-density components.



Copyright © 2019 I-Connect007. All rights reserved.