Alpha to Partner with Lenz for Technical Seminar in Warsaw


Reading time ( words)

Alpha Assembly Solutions will present its expert knowledge on optimizing SMT, wave and manual soldering processes with emphasis on low-temperature solutions and preform technologies at the upcoming technical seminar hosted by Lenz, Alpha’s premium distributor for Poland. The seminar will be held on Thursday 20th September in Warsaw.

Corné Hoppenbrouwers, sales and technical support for Alpha Assembly Solutions, will present on SMT, wave and hand soldering best practices as well as low-temperature soldering solutions. Corné will discuss the benefits of Alpha’s revolutionary HRL1 solder alloy which was designed to exhibit improved drop shock and thermal cycling performance over existing low temperature alloys. ALPHA HRL1 paired with the ALPHA OM-550 low-temperature chemistry blends to create a high reliability solder paste product which delivers a reduction in component and board warpage of up to 99%, as well as significantly improved BGA mechanical reliability compared to other low temperature alloys.

Daniele Perico, engineered materials development manager for Europe for Alpha Assembly Solutions, will present on the benefits of using preform technologies, such as alpha exactalloy tape and reel preforms, for PCB assembly. Preforms enable the precise increase of solder volume for improved joint reliability, as well as reduced flux residue for increased electrical reliability and void reduction under component thermal pads.

Alpha and Lenz Sp.j have enjoyed a successful partnership for over 20 years, with Lenz supplying Alpha products throughout Poland.

The Technical Seminar will be held at the Radisson Blu in Warsaw, Poland from 09:00am on Thursday 20th September. As well as presentations from Alpha, representatives from Kyzen and Tecnometal will also give technical presentations.

To register for the event, click here.  

About Lenz Sp.j

Lenz has operated in the electronics industry since 1991. Over the years Lenz has gathered extensive knowledge of soldering processes, materials, machines and equipment. As well as offering the highest quality products, Lenz provides techical solutions, solder composition analysis services and advice on the implementation of their products.

For more information please, click here.

About Alpha Assembly Solutions

Alpha Assembly Solutions, part of the MacDermid Performance Solutions group of businesses, is the world leader in the development, manufacturing and sales of innovative specialty materials used for electronics assembly, die attach and semiconductor packaging in a wide range of industry segments, including automotive, communications, computers, consumer, power electronics, LED lighting, photovoltaics, and others.

As the electronics industry continues to evolve, Alpha is focused on developing novel and unique processes for solving assembly challenges. Whether traditional electronics assembly, die attach or emerging applications, such as flexible and formable electronics, Alpha designs solutions for manufacturing that looks at how multiple products can interact in the same environment to provide customers with the most effective assembly solution for their application.

Since its founding in 1872, Alpha has been committed to developing and manufacturing the highest quality materials with a focus on sustainability and recycling services. For more information, click here.   

Share

Print


Suggested Items

Tips & Tricks: Water Contamination and Flux Expiry

04/17/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Solder joints that form properly are not expected to exhibit reduced reliability. However, a higher number of defects created tends to lead to a higher chance that defective connections escape detection through inspection and functional testing, and that’s not a risk to be taken lightly.

Tips & Tricks: Humidity Level for Electronics Assembly

04/10/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Low relative humidity (RH) can allow for higher static charges to build on objects. It can also affect solder pastes, especially OR-class pastes, and this can reduce print performance and stencil life. Read on to find out what level of RH you need for your assembly facility.

IPC Working to Revive Lead-Free R&D in High-Reliability Sectors

04/10/2019 | Chris Mitchell, IPC VP, Global Government Relations
Ask yourself the following question: Why is it that the aerospace, defense and high performance (ADHP) electronics sectors remain reliant on lead solders and components even as the commercial sector has largely phased out their use?



Copyright © 2019 I-Connect007. All rights reserved.