Seica to Participate at SMTA International 2018


Reading time ( words)

Seica Inc., will be exhibiting at the SMTAI trade show to be held in Chicago, IL on October 16 – 17, 2018. Seica’s Pilot V8 automated flying prober will be on display in booth #424. The Pilot V8 Next> series is Seica’s latest innovative flying prober on the market today. It’s ability to test traditional loaded boards is unmatched in today’s market, but also its ability to test wafers, substrates, MLOs and assemblies is quite extraordinary. From NPI pilot runs to full production runs, with its fast ICT test capabilities the system can also be configured to regenerate netlists and schematics for circuit assemblies that have no data whatsoever. The system can also be configured for functional testing such as; power up, boundary scan, flash programming, and LED testing or using Seica’s functional language the user can create their own test code or run National Instruments Teststand Labview sequences. Seica will also discuss many other product offerings from bed of nails testers, to automation equipment, conformal coat and THT (Dragonfly) test systems, and our laser based selective solder system called the Firefly.

Pilot V8 Next > series, the most complete flying probe test platform on the market, provides up to 20 mobile  resources for testing an electronic board, including test probes which can each apply up to 2A current, high-resolution cameras for automatic optical inspection, barcode and data matrix reading, laser sensors, capacitive probes, pyrometers, optical fiber sensors for LEDs, minifixtures for boundary scan and On Board Programming, high-frequency probes able to measure signals at frequencies over 1.5 GHz (an absolutely unique performance on the market). Engineered for medium/high volume production, the Pilot V8 Next > series is available in a fully-automated version, capable of hosting from 1 to 12 racks of boards to be tested (even of different types) or for direct connection to board loading/unloading and tilt modules, compatible with any standard assembly line. The Pilot V8 Next > can be configured to satisfy the full range of different board test requirements: the HR version extends the performance to include probing of extremely miniaturized devices (down to 30 µm), while in the XL version expands the standard work area from 610 x 540 mm to 800 x 650 mm, able to accommodate and test “extra-large” boards.

Firefly-B-Next-17.jpgThe Firefly Next > series, represents a major technological advance in laser selective soldering. The result of a totally new design and engineering effort, it includes a state-of-the art high-efficiency LASER source, a new spot angle on the board to be soldered, a fully-programmable donut spot and the perfect integration on a single axis of the laser,  vision system and temperature sensor, which enables simple calibration and  provides continuous, closed loop feedback from the soldering process, which greatly surpasses the levels of performance available until now in terms of throughput, applicability and reliability. 

Dragonfly-Next-17.jpgDragonfly Next > series is an AOI system providing optical inspection capabilities of conformal coating as well as THT components on electronic boards. Both the THT and CC versions of the Dragonfly include a SMEMA compliant rail conveyor, can be configured to inspect one or both sides of the board, and an intuitive and streamlined management software environment which enables the user to develop and deploy an application program in a few hours.

Discover the performance at Booth #424. 

About Seica

Founded in 1986, Seica S.p.A. is an innovative, high technology company that develops and manufactures leading-edge solutions for the test and selective soldering of electronic boards and modules. Combining deep expertise in electronics technology as well as in industrial machines and processes has enabled Seica to become a global leader and supplier of test and manufacturing solutions, with an installed base of more than 2000 systems on 4 different continents. Seica has fully embraced the concept of Industry 4.0, developing solutions to monitor and collect information from machines and industrial plants to enable the optimization of manufacturing processes, maintenance and energy management.

Company headquarters are located in Strambino, Italy, with direct offices in USA, Germany, China, Mexico and France, supported by a vast distribution network covering the rest of the world. Since 2014, the Seica Group includes  Seica Automation, located in Milan, which designs and manufactures board handling systems and other automation equipment for the electronics manufacturing industry.

Share

Print


Suggested Items

Catching up With Niche Electronics

10/09/2019 | Dan Beaulieu, D.B. Management Group
Niche Electronics President Frank Bowman speaks with Dan Beaulieu about his company, their services, how they help their customers, and their plans for the future.

SMTAI 2019: Happy Holden’s On-the-Scene Report

10/03/2019 | Happy Holden, I-Connect007
Last week concluded the 2019 SMTAI conference in Rosemont, Illinois. Overall, I think the show was successful and covered all aspects of SMT processes.

IPC Panel on Bottom-terminated Components

09/27/2019 | Andy Shaughnessy, I-Connect007
During the IPC Summer Meetings in Raleigh, North Carolina, I sat down with Tom Rovere, a materials and process engineer at Lockheed Martin in Owego, New York. We explored a panel discussion on bottom-terminated components (BTCs) that Tom participated in as well as the challenges and issues related to BTCs and the important role that designers play in that process.



Copyright © 2019 I-Connect007. All rights reserved.