KIC to Demo Auto Profiling and Intelligent Network Software Ecosystem at SMTAI


Reading time ( words)

KIC will be exhibiting at SMTA International, scheduled to take place October 16-17, 2018 at the Donald Stephens Convention Center in Rosemont, Illinois. The new RPI i4.0 automatic profiling system with network software for real-time dashboard, data sharing, and traceability storage will be demonstrated in Booth #124.

KIC RPI i4.0 automatically acquires profile data from each product soldered in the reflow or curing oven, in real-time. This new ecosystem offers full thermal process traceability, reduced scrap and rework, improved production line utilization and fast defect troubleshooting. Advanced data search and communication features save engineers valuable time.

The profile is compared to the relevant process window for traceability and can alarm instantly on out of spec conditions. Advanced search and filter functions on product name, customer name, time period and more, instantly provide pertinent data for deeper insight and effective troubleshooting. 

With RPI i4.0 all relevant data can connect to the factory MES or your factory data collection system to be easily shared with personnel, and can be accessed from any authorized PC or mobile device. The enhanced level of automation delivers improved line utilization and productivity.

About KIC

Based in San Diego, KIC is the industry leader in automated thermal process tools and systems for reflow, wave, curing and semiconductor thermal processes. The company pioneered the development of oven profilers and process optimization tools, and then worked to create the next generation of thermal systems to help manufacturers improve the thermal process quality while reducing cost.

KIC products include the KIC SPS, K2, X5, KICstart2, ProBot, 24/7 Wave and the KIC RPI. With the introduction of cutting edge tools, the company continues to stay on the leading edge of process optimization and automatic thermal process systems and has won numerous industry awards.

Share

Print


Suggested Items

The Perfect Job

05/06/2019 | Nolan Johnson, I-Connect007
After all the days and weeks invested into developing the schematic, the PCB design, poring over the data sheets and online libraries for component parts, and running the calculations for mechanical clearances inside the enclosure, you—designers—are ready to be done. You're ready for the next design challenge—not for a week or so perfecting the bill of materials and the design notes. And there's the rub. Find out why.

Bill Cardoso Discusses Creative Electron’s Inspection Strategy

04/03/2019 | Tim Haag and Barry Matties, I-Connect007
At PCB West in Santa Clara, California, Dr. Bill Cardoso of Creative Electron held a class on advanced packaging and X-ray inspection strategy. Guest Editor Tim Haag and Publisher Barry Matties met with Bill to further discuss his class and the importance of turning inspection data into information.

Octane Open Concept Solution: Innovative Analytics and Floor-control Software

04/01/2019 | Nolan Johnson, I-Connect007
Octane Open Concept targets the contract manufacturer and is well along in the development process for a pair of software tools designed to optimize assembly and testing results tracking on the manufacturing floor. In an interview, CEO Craig Reiselt discusses the company and the products and opportunities in front of Octane.



Copyright © 2019 I-Connect007. All rights reserved.