Koh Young Technology Highlighted Meister System at Semicon Taiwan


Reading time ( words)

Koh Young Technology showed the latest Meister-D for the SiP (system-in-package) assembly process. This innovative technology was recently highlighted at SEMICON Taiwan in the Taipei Nangang Exhibition Center. 

The latest Meister-D system is optimized for die inspection and ensures the fastest, most accurate measurement with an 8-projector inspection probe specialized for typical SiP components including microchips and die. The system allows full 3D die and crack inspection, plus 0201M (008004”) SMDs.

Additionally, this in-line 3D inspection solution for IC package manufacturing has a wide range of inspection capabilities including missing, offset, rotation, polarity, dimension, co-planarity, and more. The system intelligently inspects for die cracking using AI-powered machine learning.

“Advanced packaging continues to undergo rapid changes,” commented Steven Choi, General Manager of Koh Young China. “There’s a reduction in the feature/component relationship and an increasing requirement for high sensitivity and throughput to handle the high-aspect-ratio structures. The Koh Young Meister series intelligently employs 3D metrology to help packaging facilities overcome such challenges.”

About Koh Young Technology, Inc.

Koh Young Technology, the leading 3D measurement-based inspection equipment and solutions provider, performs an essential role for quality control and process optimization across a growing set of industries including printed circuit board assembly, machining and assembly process manufacturing, semiconductor manufacturing, and various medical fields. In addition to its corporate headquarters in Seoul, Koh Young has regional sales and support offices in Germany, Japan, Singapore, China, Mexico, and the United States. These local facilities ensure Koh Young maintains a close relationship with its growing customer base, while providing them with access to a global network of 3D measurement and process experts.

Share

Print


Suggested Items

RTW IPC APEX EXPO 2019: KIC Speaks on Data, Voiding and Traceability

02/04/2019 | Real Time with...IPC
Bjorn Dahle, president of KIC, talks with I-Connect007 Technical Editor Pete Starkey about how the industry has shifted its focus from the machine to data; the issue on voiding and how manufacturers can address this process challenge; and traceability.

More Than Inspection: It’s Process Improvement

01/09/2019 | Barry Matties, I-Connect007
Barry Matties speaks with Brian D’Amico, president of MIRTEC, about the current state of machine-to-machine communication in the industry, and how the inspection company is interfacing with the different manufacturing languages currently available to gather predictive data and feedback from every inspection step to eliminate future defects.

Words of Advice

01/02/2019 | Stephen Las Marias, I-Connect007
In our recent designer survey, we asked the following question: “What advice would you give an OEM system designer?” Here’s what our EMS experts said.



Copyright © 2019 I-Connect007. All rights reserved.